1st generation buschur exhaust (slip fit)?

Reply Subscribe

Thread Tools

Search this Thread

Jun 6, 2005 | 08:19 AM

exhaust_note

Thread Starter

Evolved Member

iTrader: (4)

Joined: Mar 2003

Posts: 643

Likes: 0

From: South Jersey

1st generation buschur exhaust (slip fit)?

i have a buschur turbo back with the magnaflow muffler and the tip sit real low from the bumper. does anyone know how to fix this?

Jun 6, 2005 | 08:20 AM

03BREvo8

Evolved Member

Joined: Dec 2004

Posts: 699

Likes: 0

From: Central MA

Adjust the hanger

Jun 6, 2005 | 08:29 AM

NYEVO8

Evolving Member

iTrader: (1)

Joined: Jun 2003

Posts: 330

Likes: 0

From: NYC

had the same problem when i had that system. i drilled a second hole about 1" lower then the existing hole on the hanger that is welded to the muffler,

Jun 6, 2005 | 04:14 PM

exhaust_note

Thread Starter

Evolved Member

iTrader: (4)

Joined: Mar 2003

Posts: 643

Likes: 0

From: South Jersey

Quote:

Originally Posted by NYEVO8

had the same problem when i had that system. i drilled a second hole about 1" lower then the existing hole on the hanger that is welded to the muffler,

thanks... i just did that... exactly 1" below and its perfect...

i just flat blacked the magnaflow muffler to so you don't see it and it looks stock....
i just fell in love w/ my buchur exhaust.. it gave me so many problems but now everything is fixed...., no rattles and looks stock to the cops (knock on wood)...