Best Stroker kit?

Reply Subscribe

Thread Tools

Search this Thread

Aug 12, 2005 | 06:35 AM

#16

LT1runner

Evolved Member

iTrader: (8)

Joined: Jul 2003

Posts: 669

Likes: 0

From: Nashville Metro

If your block is ok, go with the stock bore with 8.5 cr like craigbb did.

Aug 12, 2005 | 06:40 AM

#17

EidolaDream

Evolved Member

Joined: Jul 2003

Posts: 812

Likes: 0

From: <--- that way

The AMS kit has my vote, I have talked with Eric and Martin alot on the phone and they sold me on that kit if I decied I want a stroker kit. There "new" design is totaly insane for reliablity. Im not going to try and give the details of the kit because I dont want to butcher there product and screw something up.. you know how forum rumors start lol.

Aug 12, 2005 | 07:00 AM

#18

91GSX03EVO

Evolving Member

iTrader: (1)

Joined: Jun 2005

Posts: 100

Likes: 0

From: New Jersey

What budget and what king of racing? 1/4 or road race?

Aug 15, 2005 | 07:12 AM

#19

Rau

Thread Starter

Newbie

Joined: Sep 2004

Posts: 50

Likes: 0

From: CANARY ISLANDS ( SPAIN)

I only want the stronger Stroker Kit to my Evo8 (only 6000kms.) (pump gas)
I like the Slowboy Racing Stroker kits and AMS kit.
What´s about Manley Rods, Wiseco and CP Pistons and 4G64 Remanufactured Crank?
I like Crower Rods, Ross Racing Pistons 8.5:1 Comp.ratio Stock Bore and New 4G64 Crank.
What´s your favorite Stronger Stroker kit combo?

Aug 15, 2005 | 10:39 AM

#20

SeanJhn9

Evolving Member

iTrader: (12)

Joined: May 2005

Posts: 398

Likes: 0

From: Meridian, ID

good thing this came up, if i was gonna do a stroker, i was thinkin about doing the jun 2.2 becuase of the simple fact that you can still rev up to 9k rpms safely, but i dont know how much it costs or anything else, if anybody can chime in on price and what not...

thanks

Aug 15, 2005 | 10:41 AM

#21

evo_il8

Evolved Member

Joined: Dec 2004

Posts: 873

Likes: 0

From: Chicago

if u go with jun lets just say u will be livin on ramen for a very long time

Aug 15, 2005 | 10:47 AM

#22

evo8_m3

Evolving Member

Joined: Apr 2004

Posts: 116

Likes: 0

From: CT

the jun stroker kit would cost around $6k plus installation.

Aug 15, 2005 | 11:01 AM

#23

Derek888

Evolved Member

iTrader: (54)

Joined: Nov 2001

Posts: 2,730

Likes: 1

From: Taipei

Quote:

Originally Posted by evo_il8

if u go with jun lets just say u will be livin on ramen for a very long time

lol.... thats so true but it really depends on who that person is.. if it was me it wouldnt be just ramen...more like steam rice and soy sauce

Aug 15, 2005 | 11:05 AM

#24

Erik@MIL.SPEC

Former Sponsor

iTrader: (94)

Joined: Dec 2001

Posts: 5,695

Likes: 24

From: Los Angeles

Quote:

Originally Posted by evo_il8

if u go with jun lets just say u will be livin on ramen for a very long time

Depends on your earning power

Aug 15, 2005 | 03:33 PM

#25

LT1runner

Evolved Member

iTrader: (8)

Joined: Jul 2003

Posts: 669

Likes: 0

From: Nashville Metro

Quote:

Originally Posted by Rau

Crower rods and manley rods are pretty much the same. I'd personally go with Wiesco instead of Ross. I think RRE has pictures comparing the two. Also go with a new 4G64 crank.

Don't forget the:

Engine gasket kit
Timming belt or belts
timming belt tensioner
tensioner pullies(this is up to you)
Balance shaft elimination

Maybe head work while it's out.
Who goes with stock springs on a rebuild.
Who goes with stock valves on a rebuild.
Maybe stock lifters depending who you ask.

Do you have the cash? Look your self in the mirror, ask that question, then go get a newspaper route going.