hks cams
Personally I ran hks 272i and e, if your intent on those cams I would do a staggered set 272 i, 280e. Will give you good power range. With my hks they had good spool and good midrange but on a stock turbo just not enough top end. So by putting a 280 e cam, you allow yourself more power in the top end. But as far as idle goes mine moped somewhat. But with these staggered they'll lope some more. Still completely streetable. Now if your friends gonna swap them, make sure u got an owner's manual or PDF manual with torque specs and take your time. Fastest I dida cam swap with lifter cleaning with one persons help took 4 hours cam marks didn't wanna line up. So if you believe yup can do it good luck. Just don't beat on it hard till u get tuned. The cams might change the way it pulls at wot, boost cut fuel cut etc.


