Well i just got done putting in my Buschur race fmic and lower pipe kit.. The only problem i have now is where the compresser side of the turbo ataches to the intercooler pipe this is no nipple to attach the boost controler line.

On the stock intercooler pice that attaches to the compreser houseing of the turbo thier was a little nipple on it for the boost controller line..

Soo is thier another place to attatch it besides thier or do i have to tap the pipe and make my own nipple for it? thanks

 

You could "T" the boost controller line into the BOV line. Although some people have reported getting flutter/surge by doing it that way.

You could also get that stock nipple welded onto your new pipe. Shouldn't cost too much.

 

Buschur taps the MBC into the BOV line on all his cars and recommends it to all his customers. It's about a 50/50 split on how people install their MBC, so just do the other method. You can find it written up all over the site, and occultworks referenced it in his first line.