Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Prediction?

Thread Tools
 
Search this Thread
 
Old Aug 9, 2006 | 10:46 AM
  #1  
olsookie's Avatar
Thread Starter
Evolving Member
iTrader: (3)
 
Joined: Oct 2004
Posts: 192
Likes: 0
From: PA
Question Prediction?

Anyone able to give me an estimate on the following mods as to how much whp I would be putting down in my 05 8?

PD Tuning GT3071 Turbo Kit
3" TBE, w/ Cat
Full IC Piping, Greddy RS BOV, Perrin Front Mount, HKS RS Intake, GSC272/264

I ask because i am talking with someone selling the PD Tuning GT3071 Turbo Kit and i'm curious as to whether or not my clutch is going to hold it(exedy stage 2) and if it's worth the effort to do the 3071 swap or not....

any opinions on the 3071 kit would be greatly appreciated too!

Thanks
Olsookie
Reply
Old Aug 9, 2006 | 11:09 AM
  #2  
lcakes05's Avatar
Evolved Member
 
Joined: Jun 2004
Posts: 532
Likes: 0
From: Gulf Breeze
dont get the 3071 a 50 trim will spool up at the same time and give u alot more power that turbo is a waste imo
Reply
Old Aug 10, 2006 | 10:50 AM
  #3  
olsookie's Avatar
Thread Starter
Evolving Member
iTrader: (3)
 
Joined: Oct 2004
Posts: 192
Likes: 0
From: PA
lol, guess that's enough said for this thread....
Reply
Old Aug 10, 2006 | 11:51 AM
  #4  
Warrtalon's Avatar
Evolved Member
iTrader: (6)
 
Joined: Jun 2004
Posts: 20,790
Likes: 2
From: Long Island, NY
3071s are good turbos, but I would be wary of anything with the name PD on it...
Reply
Old Aug 10, 2006 | 11:57 AM
  #5  
Ninj0x's Avatar
Evolving Member
iTrader: (3)
 
Joined: May 2004
Posts: 392
Likes: 0
From: California
I don't think you should be able to over power that clutch. What is it rated at?
Reply
Old Aug 10, 2006 | 12:04 PM
  #6  
olsookie's Avatar
Thread Starter
Evolving Member
iTrader: (3)
 
Joined: Oct 2004
Posts: 192
Likes: 0
From: PA
Stage 2 Clutch torque capacity at flywheel for circuit is 480Lbs-ft, for drag is
390lbs-ft including safety factor
Reply




All times are GMT -7. The time now is 01:01 PM.