Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

anyone else put a greddy type s in their evo?

Thread Tools
 
Search this Thread
 
Old May 13, 2003 | 10:20 PM
  #1  
Rollaway's Avatar
Thread Starter
Former Sponsor
iTrader: (4)
 
Joined: Apr 2003
Posts: 1,112
Likes: 0
From: New York
anyone else put a greddy type s in their evo?

i have a greddy type s in my evo as well as in my talon...
same bov but totally different sound...
in my talon a loud whistle
but in my evo a loud fluttering wooosh...
i spoke to jeff from turbo trix and he said his flutters to
does anyone here have a greddy type s in their evo?
if u do how did u set the screw and what does it sound like?
Reply
Old May 13, 2003 | 10:29 PM
  #2  
Incognito's Avatar
Evolving Member
iTrader: (8)
 
Joined: Apr 2003
Posts: 322
Likes: 0
From: Dirty Jersey
It's normal to hear the flutter noise at low rpms/low load.
When I had mine, it made the whhose sound, then a sharp whistle.

I had my screw set about 1/2 way in, so maybe like 6 or 7 threads were still sticking out.
Reply
Old May 14, 2003 | 01:40 AM
  #3  
Coolguy949's Avatar
Evolved Member
iTrader: (10)
 
Joined: Jan 2003
Posts: 1,630
Likes: 0
From: Orange County, CA
Fluttering will also happen if you have it installed backwards. Make sure the outlet is going into the turbo inlet pipe. A couple people have made that mistake already in here.
Reply




All times are GMT -7. The time now is 12:49 PM.