Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

LM-1 Wideband issue???

Thread Tools
 
Search this Thread
 
Old Nov 2, 2006 | 01:38 PM
  #1  
xLaNcErEvOx's Avatar
Thread Starter
Evolved Member
iTrader: (57)
 
Joined: Jul 2003
Posts: 767
Likes: 1
From: Houston,TX
LM-1 Wideband issue???

I've been running logs for about a week now with the 02 sensor reading just fine. Idle would be somewhere around 14.7. Well today after a couple days of not messing with it, I turned it on to find that the readings were acting up. I got 20's for idle and the numbers jumping between 20 and 100 and what not. Well I did the free air calibration but it is still acting up. Anyone know whats wrong?
Reply
Old Nov 2, 2006 | 02:15 PM
  #2  
xLaNcErEvOx's Avatar
Thread Starter
Evolved Member
iTrader: (57)
 
Joined: Jul 2003
Posts: 767
Likes: 1
From: Houston,TX
bump
Reply
Old Nov 2, 2006 | 06:02 PM
  #3  
LILKEEZY2003's Avatar
Newbie
 
Joined: Feb 2005
Posts: 96
Likes: 0
could be the sensor is dirty or the sensor is bad...i used to have the same problem i bought a new sensor and never happened again
Reply
Old Nov 2, 2006 | 06:05 PM
  #4  
xLaNcErEvOx's Avatar
Thread Starter
Evolved Member
iTrader: (57)
 
Joined: Jul 2003
Posts: 767
Likes: 1
From: Houston,TX
ill try cleaning it. thanks
Reply
Old Nov 2, 2006 | 06:12 PM
  #5  
LILKEEZY2003's Avatar
Newbie
 
Joined: Feb 2005
Posts: 96
Likes: 0
yea no problem also if anything clean the sensor and free air calib it then if that dont work its most likely the sensor or check out their chat forums....if im not mistaken its tuneyourengine.com
Reply




All times are GMT -7. The time now is 09:42 AM.