got my car dyno'd on a dynojet today for the first time. car made 288whp and 296tq..all i got is a tbe and a drop in. boost is set at 21. i was actually happy since i dont really have anything done to the car but my friend thought it was low. does it seem low to you guys? what #s am i suppose to see anyways? i dont really know much about dynos, i just did it for the hell bcuz i got a $50 discount so i was like hey what the heck. lemme hear some opinions.

 

You have to be more specific than that. Do you have a flash? if not on a dynojet which reads higher than a mustang dyno, sounds about right to me.

 

+100000!!

 

hey from what i remember back when i had my evo in 2003 is a stock evolution has about 223 awhp and boosts peak at 19 psi but i dont remember at what rpms... so it depends what rpms its boosting 21 psi at and all that.... can you post up the dyno sheet and you can get a little bit more spicific answer and maybe at what rpms the turbo is boosting 21 psi. but from my opinion that is probably a pritty good gain. around 70 something hp for 2 psi is not bad.

 

Well unfortunately you don't have the before mod (baseline run) numbers. Generally, dyno numbers are really only good for comparison (pre / post a change) or for a range. As you know, there are a ton of environmental factors (temperature and humidity) that can inflate / deflate hp / tq...The other thing that people sometimes don't spend enough time doing is making the TQ curve optimal -- most go for a big single number and don't concentrate on the curve.

As to your numbers -- seem nice to me

Enjoy & Congrats!

 

on a 03 with smaller hotside, and just a TBE + drop in and boost control, your right where you should be.

with a tune you can get a couple xtra rabbit power.

 

yeah thats about as high as you should go before you get new software