Jun Lash Killers
Dec 5, 2006, 06:19 PM
#1
Newbie
Thread Starter
Join Date: Jan 2006
Location: FL
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Jun Lash Killers
I'm curious to know if anyone runs the JUN lash killer solid lifters on their 4g63.
I received a set of these along with the JUN cams and JUN stroker kit they sent from japan. There is no documentation that came with them as to what valve lash clearance they are suppose to have. They came with shims that i have put in when i first assembled the motor, but they appear to be too tight.
I emailed JUN with no luck, they want me to ship the head, which is a brand new cosworth head, and im not about to ship it all the way to japan.
My next option is to try without the shims or try shims from different applications (nissan shims appear the same diameter but different height)
If anyone has had any experience with them, id greatly appreciate it.
Regards,
Mase
I received a set of these along with the JUN cams and JUN stroker kit they sent from japan. There is no documentation that came with them as to what valve lash clearance they are suppose to have. They came with shims that i have put in when i first assembled the motor, but they appear to be too tight.
I emailed JUN with no luck, they want me to ship the head, which is a brand new cosworth head, and im not about to ship it all the way to japan.
My next option is to try without the shims or try shims from different applications (nissan shims appear the same diameter but different height)
If anyone has had any experience with them, id greatly appreciate it.
Regards,
Mase
Dec 7, 2006, 06:14 AM
#3
Evolving Member
iTrader: (2)
Join Date: Jun 2004
Location: Somewhere on the Planet
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
I have the specs from JUN some where... I can try to find them for you if you like.
Could you please post pictures of the lifters and shims, I'm going to get a set of those. I tries BLE but they was just garbage! Three of the came loose and almost killed my Cosworth head.
Could you please post pictures of the lifters and shims, I'm going to get a set of those. I tries BLE but they was just garbage! Three of the came loose and almost killed my Cosworth head.
Dec 17, 2006, 06:27 PM
#5
Newbie
Thread Starter
Join Date: Jan 2006
Location: FL
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Tw3NTy0n3
04-06 Ralliart Engine/Drivetrain
0
May 21, 2016 11:24 PM
