i just installed this and was wondering what other users where setting the gain at, and what boost setting they used to achieve 21psi the boost controller uses a differant type of messurment then psi or bars.

Thanks............

 

The Blitz description for that controller is located at:

http://www.blitz-performance.com/Blitz_Boost_Dsbc.htm

Look at http://www.splparts.com/doc/tech/EBC.htm for a general description of how an EBC works and a comparison of different systems.

Look at http://www.geocities.com/MotorCity/S...bc_manual.html for a better idea of just how this specific controller works

I hesitate to give you specific information on gain settings, but if you can't figure them out after reading the pages above, send me a PM and I'll discuss them with you. I just don't want to be remotely responsible for your settings as they are what keep your system safe, and you need to decide how much you're willing to risk.

 

thanks for the quick response

 

You're welcome. Since you're in SoCal, you might try a short discussion with Scot Grey or Ty at RRE, both of whom would be excellent sources of reliable information on particular settings taking your mods into account.