AFI Turbo Kit Installed

precisi0n · 2006-12-20 07:22:14

Here ya go {thumbup} Still have to send a couple things to get coated... but you get the idea http://members.cox.net/rstrope/Enginebay8x6.JPG How does she idle with the Gsc 280 cams and flash? Nice numbers{thumbup} {thumbup}

Reply Subscribe

Thread Tools

Search this Thread

Feb 6, 2007 | 08:09 AM

#31

Evo8Master

Evolved Member

iTrader: (19)

Joined: Oct 2003

Posts: 555

Likes: 0

From: Cali

Quote:

Originally Posted by precisi0n

Here ya go

Still have to send a couple things to get coated... but you get the idea

How does she idle with the Gsc 280 cams and flash? Nice numbers

Feb 6, 2007 | 06:52 PM

#32

precisi0n

Thread Starter

Evolving Member

iTrader: (17)

Joined: Jan 2004

Posts: 442

Likes: 0

From: College Station, TX

Well, as promised, here it is....

Feb 6, 2007 | 07:47 PM

#33

precisi0n

Thread Starter

Evolving Member

iTrader: (17)

Joined: Jan 2004

Posts: 442

Likes: 0

From: College Station, TX

Quote:

Originally Posted by Evo8Master

How does she idle with the Gsc 280 cams and flash? Nice numbers

I like the chunky idle

Feb 7, 2007 | 12:22 PM

#34

riceball777

Evolved Member

iTrader: (33)

Joined: Oct 2006

Posts: 1,367

Likes: 1

From: Los Angeles

what kinfand size turbo was this???
also how much power does it make on pump gas alone at about 20-21 psi

Feb 7, 2007 | 12:32 PM

#35

KartaRailed

Evolved Member

Joined: Jun 2006

Posts: 822

Likes: 0

From: Jacksonville/Boca Raton

Made 511 on a dynapack dyno none the less, I thought for sure I was gonna see dynojet, dynopacks read quite low in comparison, not as bad as a mustang, but down there. Good one, and the mani design looks cool as shat.

Feb 7, 2007 | 12:52 PM

#36

riceball777

Evolved Member

iTrader: (33)

Joined: Oct 2006

Posts: 1,367

Likes: 1

From: Los Angeles

many many dyno packs read the same as dyno jets. some even read lower

Feb 7, 2007 | 01:30 PM

#37

AFI Turbo

Account Disabled

iTrader: (10)

Joined: Jun 2006

Posts: 1,180

Likes: 0

From: Phoenix

Most of the dynapacks out here seem to read lower than the local dynojets. Either way numbers are just that, numbers.

Feb 23, 2007 | 08:17 PM

#38

matyb

Evolving Member

iTrader: (1)

Joined: Oct 2006

Posts: 492

Likes: 0

From: south jersey

yea it was your thread, and yes im still stalking thiis set up

i postted the thread you rsponded to. well i hope to buy this kit soon. as promised i'll let you know the results

Oct 18, 2010 | 03:43 PM

#39

ryukinevo

Evolving Member

iTrader: (36)

Joined: Mar 2005

Posts: 159

Likes: 1

From: Midwest

Quote:

Originally Posted by precisi0n

UPDATE: The turbo kit and IC piping is done except for the coating. Dyno sheet and updated pictures on page 2/3. AFI's name on the forums is AZ-FI. If you have any questions, Jesse can answer them. They have bent over backwards to take care of me, as they will anyone who buys anything from them. I also have to give credit where credit is due for the tuning. Al has done it again

. Thanks alot for the tune. I will be needing your services again once I get the rest of the motor done...

I know this is a long shot because this is an old thread, but I need help on making lines for this kit.

For some reason AFI Turbo makes everything for a kit, except they do not have information for the oil lines and water lines anymore.

Garrett Turbo has only distributors to call and no phone# for oil line specs on there GT35R.

Do you still own the car and the kit? Do you have any idea what was installed with this kit?

I would like to replace all the factory lines with the right -AN spec for this GT35R.