Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Oil Filter

Old Jun 6, 2003 | 07:53 PM
  #1  
aZnLaNcEr's Avatar
Thread Starter
Newbie
 
Joined: Dec 2002
Posts: 90
Likes: 0
Oil Filter

does anyone know what oil filter is good for our evos cause i was planning to buy a k&n oil filter but i have no clue whether they make one for us or now
Reply
Old Jun 6, 2003 | 07:56 PM
  #2  
Guru_Del's Avatar
Evolved Member
iTrader: (5)
 
Joined: Dec 2002
Posts: 1,735
Likes: 0
From: Lake Elsinore, CA
i believe you need the factory filter from for warenty reasons
Reply
Old Jun 7, 2003 | 12:00 AM
  #3  
Evoluski's Avatar
Newbie
 
Joined: Mar 2003
Posts: 12
Likes: 0
From: MN
I have a K&N on my EVO. The model is HP-1004. Mobil 1 also makes a pretty good filter.
Reply
Old Jun 7, 2003 | 01:17 AM
  #4  
aZnLaNcEr's Avatar
Thread Starter
Newbie
 
Joined: Dec 2002
Posts: 90
Likes: 0
i was checking the k&n website and the only oil filter for the lancer is the hp-1010 and it is supposedly right for all mitsu L4 engines so i am bit unsure of it.
Reply
Old Jun 7, 2003 | 01:27 AM
  #5  
solarxclipse's Avatar
Evolved Member
iTrader: (11)
 
Joined: Feb 2003
Posts: 989
Likes: 0
From: San Diego, California
I think we should only use Genuine Mitsubishi Oil Filter for our Evo. Since our Evo are so brand new, it will be hard to find after market oil filter. And besides, you don't want your warranty to be voided if you use a different brand of oil filter wouldn't you? So stick with Genuine Mitsubishi Oil Filter It will make your Evo last longer.
Reply
Old Jun 7, 2003 | 01:37 AM
  #6  
spyderturbo's Avatar
Evolving Member
 
Joined: May 2003
Posts: 253
Likes: 0
From: Connecticut
I just bought my first filter the other day.

It comes with a replacement crushable washer for the drain plug. Something I'm sure any aftermarket filter wont have.

I definitely wouldnt mess around specifially for warranty reasons....and would advise anyone to stick with the OEM filter.

Oh...and save all receipts of purchase for mobil 1 and the filters!
Reply
Old Jun 7, 2003 | 01:43 AM
  #7  
solarxclipse's Avatar
Evolved Member
iTrader: (11)
 
Joined: Feb 2003
Posts: 989
Likes: 0
From: San Diego, California
Did any one noticed their oil drain plug under the oil pan? It has a white wire that connects to the drain plug. The very first time I've seen an oil drain plug with a wire attached to it. Must be an oil sensor I think.
Reply
Old Jun 8, 2003 | 05:37 AM
  #8  
DA-Evo's Avatar
Evolving Member
 
Joined: May 2003
Posts: 210
Likes: 0
i will jsut use OEM oil filter, cant go wrong with it
Reply
Old Jun 8, 2003 | 05:39 PM
  #9  
Tarmac Black's Avatar
Newbie
 
Joined: May 2003
Posts: 36
Likes: 0
From: Iowa
Originally posted by solarxclipse
Did any one noticed their oil drain plug under the oil pan? It has a white wire that connects to the drain plug. The very first time I've seen an oil drain plug with a wire attached to it. Must be an oil sensor I think.
thats not the right plug.
Reply
Old Jun 8, 2003 | 08:30 PM
  #10  
Evoluski's Avatar
Newbie
 
Joined: Mar 2003
Posts: 12
Likes: 0
From: MN
if you have the oil temp gauge I believe the sensor is located in the oil drain plug and that's why there is a white wire.
Reply
Old Jun 9, 2003 | 11:57 AM
  #11  
AutoXer's Avatar
Evolved Member
iTrader: (1)
 
Joined: Dec 2002
Posts: 804
Likes: 0
From: Logan, WV
Originally posted by spyderturbo
I just bought my first filter the other day.

It comes with a replacement crushable washer for the drain plug.
Did you get a MD356000 filter? I just bought one and had to buy the crush-washer seperatly. It was not in the box with the filter.
Reply
Old Jun 9, 2003 | 01:02 PM
  #12  
3171's Avatar
Evolving Member
 
Joined: Mar 2002
Posts: 226
Likes: 0
i use sard
Reply
Old Jun 9, 2003 | 01:05 PM
  #13  
AutoXer's Avatar
Evolved Member
iTrader: (1)
 
Joined: Dec 2002
Posts: 804
Likes: 0
From: Logan, WV
Originally posted by 3171
i use sard
Is sard a brand?
Reply
Old Jun 9, 2003 | 11:36 PM
  #14  
diesel_fan's Avatar
Evolving Member
 
Joined: Aug 2002
Posts: 158
Likes: 0
From: Raynham, MA
Some alternate fits since us non-Evo's use the same part. ( Please keep in mind - I'm not telling you to use them, so no flames please )

Mobil1.....M1-110
Bosch......3323
Fram.......7317
K&N.........HP1010
Wix..........51356
Napa........FIL1356
Baldwin....B1402
Donaldson..P502007

Been browsing those photo threads of all the Evo's...very jealous OZ owner here!

DF

Last edited by diesel_fan; Jun 9, 2003 at 11:41 PM.
Reply
Old Jun 10, 2003 | 12:03 AM
  #15  
Zeus's Avatar
EvoM Staff Alumni
iTrader: (66)
 
Joined: Aug 2002
Posts: 5,454
Likes: 1
From: Austin, TX
Originally posted by diesel_fan
Some alternate fits since us non-Evo's use the same part. ( Please keep in mind - I'm not telling you to use them, so no flames please )

Mobil1.....M1-110
Bosch......3323
Fram.......7317
K&N.........HP1010
Wix..........51356
Napa........FIL1356
Baldwin....B1402
Donaldson..P502007

Been browsing those photo threads of all the Evo's...very jealous OZ owner here!

DF

Any of these a higher capacity filter?
Reply

Thread Tools
Search this Thread

All times are GMT -7. The time now is 01:18 PM.