Ok, I have searched and searched, and have had no reply in the parts request thread... so does any one know what the part number is for the stock lifters?????

thnxs

 

I used a set of of the new style lifters for DSMs. The hole was bigger than that of the stock EVO lifter. Got them from a friend, who got them from SBR, IIRC. 149 bucks. They don't list them for the EVO, but AFAIK they are interchangeable.

 

what do u mean they dont list them for the evo... there has to be a part number..

 

If you read my post in sequence, and take that statement in context, it should make more sense. SBR does not list them for EVOs, only for DSMs. If you want a Mitsu part number specifically, going to a dealership would be the next logical step IMO.

 

pm spins4

 

Get the JAM lifters.

 

dude I had to replace my lifters on my VIII, I ordered from the site below... no issue's with them, they're made by TopLine and to my knowledge they make the lifters for Mitsu, don't quote that, just what I had heard.... Good Luck!

http://www.extremepsi.com/store/cust...bcategories=on

 

MD377054 part number for Oem lifters to bad they are 30.00 a piece, which equals to 450.00 or so... what a rip that is... I will probably go with the jams. thnxs fellas..

 

no problem... good luck man

 

I just called my local mitsu dealership, to see if I could get OEM lifters any cheaper, and unfortunately, I cannot.

However, the Topline Revised Lifters are completely interchangeable, and we have those almost always in stock for $150.00 a set!!

PM me for more details!

Thanks,