Weird sputter... am I "blowing out spark" Need Advice

Reply Subscribe

Thread Tools

Search this Thread

Jul 7, 2007 | 06:45 PM

#16

sparky

Evolved Member

iTrader: (1)

Joined: Mar 2005

Posts: 7,905

Likes: 5

From: Mesoamerica/ SF Bay Area

I like the BR8ES´s too. I think that probably they´ll tend to last longer w/o fouling at .023" or .024", especially if you´re blowing out the hotter 7´s at high boost #´s and a big gap. I put a fresh set of 8´s in last night, gapped at .026" and the engine runs super smooth.

All we did was install fresh plugs and I cleaned the air filter and turned up the boost by 1# and we got an increase of 14 HP as extrapolated by the DataLogLab program. That was with zero knock on 91 octane. We didn´t touch the maps at all. I love these plugs.

Jul 7, 2007 | 07:02 PM

#17

ONRAILS

Evolved Member

iTrader: (7)

Joined: Jul 2006

Posts: 841

Likes: 0

From: Kentucky

Quote:

Originally Posted by justchil

Well.... all was good.....

SMC Alky kit appears to be dead (2nd time). Power LED is on. Test does nothing and it doesn't spray (no afr change). Thank god I keep a close eye on things or this would be my 2nd blown motor due to SMC alky kit failures.

which is why i'll stick to race gas. I would love to get some E85 on pump here....

why dont you try another company then?