Need this for ordering some bolts for use of engine stand.

 

12x1.00 I believe.... Anyone sure?

 

One final bump?

 

Last bump. I swear!

 

why dont you just get under the car, take ONE out and take it to the hardware store and find out.. may be your quickest way!! if not then here is a free bump for a good question!!

 

i live on an a small island. none of the rink a dink hardware stores carry metric

so i order from nutsandbolts.com which by the way is a nice online store. they have scotch locks too if ur looking.

 

Almost every bolt on DSMs and EVOs is a 1.25 pitch. The tranny to block bolts are mostly M10x1.25s, IIRC. In general, bolts with 12mm heads are M8x1.25, 14mm heads are M10x1.25s, and 17-19mm heads are M12x1.25. This only applys to stock bolts. Hardware store bolts typically are 1mm larger on the head size.

 

Thank you guys!

FYI Nutsandbolt.com metric assortment was not so great. BoltDepot.com worked out better.