What fan to go with??
What fan to go with??
Hey guys i recently ordered my new turbo and i dont think its going to work with my factory fan, My 50 trim turbo BARELY clears the fan shroud now. What aftermarket fans are you running. i ordered the sc6152 (equivalent to 35r). And also i was wondering will my injectors be sufficient enough for 21-23 psi? They are precision 780cc. Im planning on running alky/meth but as of now i cant afford to do that. So will my injectors be fine for now? Thanks for all the help guys!
You wont run that low boost, after you get everything working right you will turn it up. The injectors should be fine at that level though.
As for the fan, I have been using for the last year athe slimmest fan that Murrays sells. It cost $59 and I have had no issues what so ever.
Its very flat and works great. Its 10 inchs.
Good luck
As for the fan, I have been using for the last year athe slimmest fan that Murrays sells. It cost $59 and I have had no issues what so ever.
Its very flat and works great. Its 10 inchs.
Good luck
Thread
Thread Starter
Forum
Replies
Last Post