I just got mine in today, but I haven't had a chance to look at it yet. I want to do it when I get home, but is there anything special I should take note of? There doesn't seem to be a write up for it in the how to section so I'm asking here. I saw the short blip on vividracing.com about how to install it, so it seems self explanatory. Just wanted to double check first before diving into it.

 

Just unscrew 2 screws and pop them out. The rest of the taillight is held in by plastic anchors so with a little force the whole assembly pops right out.

 

Can I ask where you bought the taillights from? Im not a big fan of the altezzas

 

Ebay. They went for $255 + $65 shipping. Pretty good deal compared to most other places in the US.

 

Damn it must be nice. My Subaru required that black tar sealant stuff layered up to get a good seal around it to keep from having water leak into the trunk.

 

pics??

 

try to be delicate lifting the trunk liner and be careful not to lose the two-piece plastic studs (i'm sure there's a proper name for those) that hold it in.

also, i am retarded and put the retainer clips for the plastic anchors on the wrong posts, and didn't realize it until i went to mount the lights and the outside side didn't lock into place - don't do that, they are a pain to remove.

 

holy ****... honestly, there is 1 plug and 2 screws (flat head) per taillamp... it will take you under 5 minutes for both

-shahul

 

Yup. Install was just as easy as Shahul explained. I'm tired now but I'll have some pics up tomorrow.

 

Don't remove any of the trunkliner! There is no need.