CBRD new dyno record...

Reply Subscribe

Thread Tools

Search this Thread

Sep 6, 2007 | 07:02 PM

#31

DS-03evo

Evolved Member

iTrader: (21)

Joined: Nov 2006

Posts: 822

Likes: 0

From: Central PA

Chad that is killer!!

How close are the injectors from being maxed out?

Sep 7, 2007 | 10:57 AM

#32

pgjoey

Evolving Member

iTrader: (12)

Joined: Feb 2005

Posts: 197

Likes: 0

From: Ashburn, VA

That is great Chad, congrats! If I were still in central PA I would be giving you some more business.

Sep 7, 2007 | 11:31 AM

#33

CBRD

Thread Starter

Account Disabled

iTrader: (60)

Joined: Dec 2004

Posts: 7,363

Likes: 8

From: york, pa 17402

ok guys update..

today we ran 28PSI on pump gas NO KNOCK!! pinning the maf at 379load on pump from 5000-8000rpm...

487whp/390wtq!!

we tried to run 29psi and its blowing the spark out!!

chart later..

cb

Sep 7, 2007 | 12:18 PM

#34

CBRD

Thread Starter

Account Disabled

iTrader: (60)

Joined: Dec 2004

Posts: 7,363

Likes: 8

From: york, pa 17402

ok....

sprayed some water on the fmic during the pull...

499.7/411wtq 30psi

sooo close

cb

Sep 7, 2007 | 12:30 PM

#35

DS-03evo

Evolved Member

iTrader: (21)

Joined: Nov 2006

Posts: 822

Likes: 0

From: Central PA

Quote:

Originally Posted by CBRD

ok....

sprayed some water on the fmic during the pull...

499.7/411wtq 30psi

sooo close

cb

LOL...it is such a hot humid day today also.

Any knock at 30psi?... damn

Sep 7, 2007 | 01:02 PM

#36

CBRD

Thread Starter

Account Disabled

iTrader: (60)

Joined: Dec 2004

Posts: 7,363

Likes: 8

From: york, pa 17402

Quote:

Originally Posted by DS-03evo

LOL...it is such a hot humid day today also.

Any knock at 30psi?... damn

up top i got a 6count... and it was damn lean...

i wouldnt run any customer car this lean... 11.9afr on pump at 30psi.....

turning it back to 26psi... and running it around 465whp on the street safe afr!

cb

Sep 7, 2007 | 01:11 PM

#37

Peter Tiebout

Evolving Member

iTrader: (3)

Joined: Jun 2007

Posts: 335

Likes: 0

From: West Chester Pa.

I want a job like yours!!!!!! Pete

Sep 7, 2007 | 01:24 PM

#38

Peter Tiebout

Evolving Member

iTrader: (3)

Joined: Jun 2007

Posts: 335

Likes: 0

From: West Chester Pa.

Where's Rambo with the pressure washer when you need to be cooler? Pete

Sep 7, 2007 | 01:40 PM

#39

Dave Mac

Evolving Member

iTrader: (2)

Joined: Jun 2006

Posts: 473

Likes: 0

From: Dillsburg

I saw it happen 499.7whp indeed! That turbo sound
is insane.

Great work CB.

Last edited by Dave Mac; Sep 7, 2007 at 05:32 PM. Reason: edit cuz I can't type...Doug

Sep 7, 2007 | 01:53 PM

#40

Nesiop

Evolved Member

iTrader: (25)

Joined: Aug 2003

Posts: 1,557

Likes: 1

From: Mass

Wait... that high of boost on straight pump no meth???

Sep 7, 2007 | 01:53 PM

#41

CBRD

Thread Starter

Account Disabled

iTrader: (60)

Joined: Dec 2004

Posts: 7,363

Likes: 8

From: york, pa 17402

it was 499.7 dave, not 599.7 lol...

cb

Sep 7, 2007 | 02:02 PM

#42

CBRD

Thread Starter

Account Disabled

iTrader: (60)

Joined: Dec 2004

Posts: 7,363

Likes: 8

From: york, pa 17402

Quote:

Originally Posted by Nesiop

Wait... that high of boost on straight pump no meth???

yes, 30psi...

headwork, flow, etc... lower compression, all allows for higher boost... this is a special head cut from JAM, not normally done, im sure it will get done more now!!!

cb