Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

New Dyno #'s

Thread Tools
 
Search this Thread
 
Old Sep 24, 2007 | 04:14 PM
  #1  
silver evo8's Avatar
Thread Starter
Evolving Member
iTrader: (7)
 
Joined: Mar 2007
Posts: 145
Likes: 0
From: Eastchester, NY
New Dyno #'s

i just went to dynoflash last weekend and got a custom tune from Al
with all of the mods below i made 334whp & 308tq at around 22psi and it pulled all the way to redline due to the 18psi wastegate, i am satisfied for now but cams, studs, clutch, and meth are coming in the spring or i might just forget about the meth and go for a 3076r if i have enough money
im going to post up pics soon for the first time
Reply
Old Sep 24, 2007 | 04:23 PM
  #2  
bluebanana23's Avatar
Evolved Member
iTrader: (26)
 
Joined: May 2004
Posts: 2,032
Likes: 1
From: DTX
check for a boost leak since your tq. is that much lower than your hp.
Reply
Old Sep 24, 2007 | 04:48 PM
  #3  
silver evo8's Avatar
Thread Starter
Evolving Member
iTrader: (7)
 
Joined: Mar 2007
Posts: 145
Likes: 0
From: Eastchester, NY
i checked before i got it tuned for a leak and i didnt find anything but ill check again and should my tq and hp be closer together
Reply
Old Sep 25, 2007 | 04:56 AM
  #4  
silver evo8's Avatar
Thread Starter
Evolving Member
iTrader: (7)
 
Joined: Mar 2007
Posts: 145
Likes: 0
From: Eastchester, NY
anybody?
Reply
Old Sep 25, 2007 | 05:14 AM
  #5  
TeStUdO's Avatar
Evolved Member
iTrader: (6)
 
Joined: Jun 2005
Posts: 1,986
Likes: 41
From: Secret Tweaker Pad
Those numbers look fine. You just arent running alot of timing at spoolup. If you posted your graph your torque is probably pretty flat. Decent #'s with no cams.
Reply
Old Sep 25, 2007 | 07:03 AM
  #6  
mac74's Avatar
Evolving Member
iTrader: (2)
 
Joined: May 2004
Posts: 233
Likes: 0
From: boston
Very good numbers. Do the cams studs and meth and watch it go over 400whp..
Reply




All times are GMT -7. The time now is 07:22 PM.