Ok so my plan is to get the AMS gt37R turbo kit but what elce will i need so i dont Screw up my car?

My plan is:
2.3L stroker kit
VSR intake manifold
AMS fuel system
1000cc injectors
AMS race Intercooler kit
HKS 264 camshafts
Supertech Dual springs and retainers
GReddy Extreme Timing Belts
AMS Turbo Back w/ Resonated Test pipe
Exedy triple plate SR type cluch
AEM EMS
HKS Boost Controller
HKS Turbo Timer

Turbo Kit link:
http://www.amsperformance.com/store/...roducts_id=807

feel free to shoot me down

 

IMO I would go with bigger cams...

 

272's?

 

Yes,JUN 272's^^^^^^^^^^^^

 

why not the HKS

 

the HKSs are not nearly as agressive as the JUNs. Get either the JUNs of the Buschur BF 272s.

 

boost and uego gauges

 

I agree, if you are going to go, go all out.

 

the turbo will carry the power up top... if you want a fat powerband dont go with an overly aggressive cam...

pm me, i have a recommendation for you

cb

 

Are the injectors rite, i used the RC injector calculator
Link:
http://www.rceng.com/technical.aspx
go to the bottom of the the page

 

Here is a link to almost the same set-up that you are doing and WHP from it as well when the 37r was 1st being introduced.
https://www.evolutionm.net/forums/sh...d.php?t=177652
I will post another link in a few minutes showing the difference in HKS and JUN cam WHP differences.

 

Here you go on HKS 280 cam test against the JUN 272's. Read the 1st post very carefully but it should not pose a problem to you as I see AEM EMS in your LIST..
https://www.evolutionm.net/forums/sh...d.php?t=191427

 

Wow! why is this?

 

what i think and i seen around you should go with 280's

 

im on about the same set up as u ,but my hks 264 cams r not doin well on the top end so i just got gsc s2 ..lets see how they will perform .
did i make the rite decision choosing gsc s2 cams ?