Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

400 awhp

Thread Tools
 
Search this Thread
 
Old Jan 14, 2008 | 02:57 PM
  #1  
EgoBstr's Avatar
Thread Starter
Newbie
 
Joined: Dec 2007
Posts: 96
Likes: 0
From: Tampa, Florida, USA
400 awhp

Can I make this with the stock turbo (EVO 9 MR)? If so what all would I need, including supporting mods?

I have:
Manifold, O2, DP, TP, GReddy Ti-C
Injen Intake, UICP, LICP
Walbro 255
GReddy RS BOV
NGK 1 Step colder Plugs
MBC

If I add the following what can I expect and is this all I need as far as supporting mods. Can I do away with any of the following as well and still support the setup properly and make the power I would like?:
3" FMIC
Cams (272), Gears, Headstuds, Timing Belt, Injectors, Fuel Rails
Meth Kit
Dynotune

Thanks!
Reply
Old Jan 14, 2008 | 03:02 PM
  #2  
kaonashi's Avatar
Evolved Member
iTrader: (34)
 
Joined: Apr 2006
Posts: 1,748
Likes: 2
From: Port Arthur, TX
why did you say evo IX MR they have the same turbo's as the other 9 turbos, you wont make 400 awhp with out cams and a damn good tune forsure, maybe 400 crank hp but not to the wheels on a butt dyno.
Reply
Old Jan 14, 2008 | 03:03 PM
  #3  
amscrazy's Avatar
Evolving Member
iTrader: (1)
 
Joined: Nov 2006
Posts: 418
Likes: 0
From: illinois (naperville/aroura)
to give u a clue...i have 414 whp with the mods in my sig
Reply
Old Jan 14, 2008 | 03:04 PM
  #4  
nikkadanny's Avatar
Evolved Member
iTrader: (31)
 
Joined: Oct 2005
Posts: 2,106
Likes: 1
From: fort worth, tx
race gas or meth
Reply
Old Jan 14, 2008 | 03:05 PM
  #5  
gixxerman11's Avatar
Evolved Member
iTrader: (10)
 
Joined: Apr 2007
Posts: 524
Likes: 0
From: Chesapeake, VA
i think with a good tune every bolt on you can get and meth maybe 375

Last edited by gixxerman11; Jan 14, 2008 at 03:06 PM. Reason: poop
Reply
Old Jan 14, 2008 | 03:09 PM
  #6  
AndyBandy's Avatar
Evolved Member
iTrader: (37)
 
Joined: Oct 2005
Posts: 542
Likes: 27
From: Frederick, MD
only if you have E85 near you (or meth/race gas)
Reply
Old Jan 14, 2008 | 03:13 PM
  #7  
EvoVIII808's Avatar
Evolving Member
iTrader: (4)
 
Joined: Jan 2007
Posts: 480
Likes: 0
From: Washington
with a very agressive tune, and some race gas you can make 400. i was cranking out 350-365 with my 8, and with the same stuff your talking about on pump with stock ecu. Race gas, and a little more tuning and you can def get 400. dont know how safe it would be to run daily, since your turbo will be maxed out, and be running a agressive map. Hell try it, and keep us posted.

Last edited by EvoVIII808; Jan 14, 2008 at 03:24 PM. Reason: add more text
Reply
Old Jan 14, 2008 | 03:15 PM
  #8  
gsXingU's Avatar
Newbie
iTrader: (3)
 
Joined: Sep 2006
Posts: 60
Likes: 0
From: ct
You will def make over 400 awhp with the mods you listed. You will be close to 370-380 with the cams, fmic, and tune. Meth would def put you over 400. Search for dynoflash's customer car making 416 with no cams. Search "dynoflash" and you will see it. So to answer your question just read that post.

Last edited by gsXingU; Jan 14, 2008 at 03:19 PM.
Reply
Old Jan 14, 2008 | 03:18 PM
  #9  
EVOlution561's Avatar
Evolved Member
iTrader: (13)
 
Joined: Jan 2005
Posts: 853
Likes: 3
From: South Florida
With those mods including the meth and a really good tune you will definitely make 400whp.
Reply
Old Jan 14, 2008 | 03:23 PM
  #10  
Balrok's Avatar
Evolved Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (15)
 
Joined: Jun 2006
Posts: 4,167
Likes: 210
From: North GA
If you don't want to mess with meth for debatable reasons, you can also choose to run race gas. With 268 cames I made 401 hp 403tq on 27psi with the same bolt-ons. TTP FTW.
Reply
Old Jan 14, 2008 | 04:13 PM
  #11  
TTP Engineering's Avatar
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
Originally Posted by Balrok
If you don't want to mess with meth for debatable reasons, you can also choose to run race gas. With 268 cames I made 401 hp 403tq on 27psi with the same bolt-ons. TTP FTW.
Add two more to that list from Saturday at the local TTP-Engineering dyno tuning day.

MitsuDave- 403whp/412tq stock turbo 2005 GSR
Most-Wanted 401whp/403tq stock turbo 2006 IX RS
Reply
Old Jan 14, 2008 | 04:40 PM
  #12  
gtfour43's Avatar
Evolving Member
iTrader: (5)
 
Joined: Sep 2007
Posts: 179
Likes: 0
From: Hawaii
Originally Posted by TTP Engineering
Add two more to that list from Saturday at the local TTP-Engineering dyno tuning day.

MitsuDave- 403whp/412tq stock turbo 2005 GSR
Most-Wanted 401whp/403tq stock turbo 2006 IX RS
That is crazy for a 8
Reply
Old Jan 14, 2008 | 04:43 PM
  #13  
TTP Engineering's Avatar
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
Originally Posted by gtfour43
That is crazy for a 8
I suppose I started a trend two and a half years ago on the local Mustang Dyno...

Reply
Old Jan 14, 2008 | 05:14 PM
  #14  
goBYeBYe's Avatar
Evolving Member
iTrader: (5)
 
Joined: Sep 2004
Posts: 218
Likes: 1
From: Queens, NY
Originally Posted by TTP Engineering
I suppose I started a trend two and a half years ago on the local Mustang Dyno...

What's your mod list? Is this on 93 pump gas alone?
Reply
Old Jan 14, 2008 | 05:20 PM
  #15  
TTP Engineering's Avatar
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
We developed this upgrade list based off of the car's mods about that time.
http://www.ttp-engineering.com/stages.html
Reply



All times are GMT -7. The time now is 08:59 PM.