Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Why are BOVs that VTA not good for MAF?

Old Sep 27, 2008 | 10:25 AM
  #16  
Forrest Gump 9's Avatar
Evolving Member
iTrader: (19)
 
Joined: Oct 2006
Posts: 474
Likes: 0
From: #1 Land
I run my car with the Tial BOV and stock ECU/MAF. Run perfectly fine. Actually better than with a stock Evo 9 crush BOV. Part throttle is perfect also. So I guess it have to do with the tune. The side effect is you'll spit a fire ball every now and then. I used the Tial BOV because my stock 9 BOV can't hold boost over 23 psi even it's crushed.
Reply
Old Sep 27, 2008 | 11:11 AM
  #17  
dsmbruno's Avatar
Evolved Member
iTrader: (21)
 
Joined: Apr 2006
Posts: 587
Likes: 0
From: US of A
Originally Posted by Forrest Gump 9
I run my car with the Tial BOV and stock ECU/MAF. Run perfectly fine. Actually better than with a stock Evo 9 crush BOV. Part throttle is perfect also. So I guess it have to do with the tune. The side effect is you'll spit a fire ball every now and then. I used the Tial BOV because my stock 9 BOV can't hold boost over 23 psi even it's crushed.
It might have to do with the "crushing" job. My stock one holds 27psi+ with no crushing. Crushed properly its suppose to hold 30psi+
Reply


Thread Tools
Search this Thread

All times are GMT -7. The time now is 12:06 AM.