EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

question on trans case

Thread Tools
 
Search this Thread
 
Old Feb 17, 2008 | 12:50 PM
Share
  #16  
steevo 8's Avatar
steevo 8
Thread Starter
Evolving Member
 
Joined: Sep 2006
Posts: 159
Likes: 0
From: new jersey
well thanks for all the input guys im going to have to have the car towed somewhere because its a brandnew buschur trans, and a brandnew shepT-case.. and i really dont need either to get messed up...
Reply
0
Old Feb 17, 2008 | 12:52 PM
Share
  #17  
cssaddictm4's Avatar
cssaddictm4
Evolved Member
iTrader: (13)
 
Joined: Nov 2006
Posts: 722
Likes: 0
From: Cape Cod, MA
Originally Posted by steevo 8
well thanks for all the input guys im going to have to have the car towed somewhere because its a brandnew buschur trans, and a brandnew shepT-case.. and i really dont need either to get messed up...
Although I don't know how far away you are, but I would take it to Sean's shop in northern Jersey.
Reply
0
Old Feb 17, 2008 | 01:02 PM
Share
  #18  
steevo 8's Avatar
steevo 8
Thread Starter
Evolving Member
 
Joined: Sep 2006
Posts: 159
Likes: 0
From: new jersey
is there a web site for the shop i will look into it. other wise i was thinkin about going to turbo trix since they built my motor. they are 43miles from me tho. thanks for any info
Reply
0
Old Feb 17, 2008 | 01:30 PM
Share
  #19  
6-speed's Avatar
6-speed
Evolved Member
iTrader: (20)
 
Joined: Apr 2003
Posts: 928
Likes: 0
From: NY/Central NJ
Originally Posted by cssaddictm4
Although I don't know how far away you are, but I would take it to Sean's shop in northern Jersey.
+1.

I went to Sean Ivey's shop for installation of my new Shep Racing T-Case a few months back.

What shop installed your T-Case before?
Reply
0
Old Feb 17, 2008 | 01:56 PM
Share
  #20  
drb's Avatar
drb
Evolving Member
iTrader: (39)
 
Joined: Mar 2007
Posts: 485
Likes: 4
From: St. Louis, MO
deleted - sorry I misunderstood - the info I posted wasn't relevant
Last edited by drb; Feb 17, 2008 at 02:27 PM.
Reply
0
Old Feb 17, 2008 | 09:20 PM
Share
  #21  
cssaddictm4's Avatar
cssaddictm4
Evolved Member
iTrader: (13)
 
Joined: Nov 2006
Posts: 722
Likes: 0
From: Cape Cod, MA
http://iveytune.com
Reply
0
Old Feb 18, 2008 | 04:38 AM
Share
  #22  
6-speed's Avatar
6-speed
Evolved Member
iTrader: (20)
 
Joined: Apr 2003
Posts: 928
Likes: 0
From: NY/Central NJ
Originally Posted by 6-speed
+1.

I went to Sean Ivey's shop for installation of my new Shep Racing T-Case a few months back.

What shop installed your T-Case before?
OOPS I made a mistake it was a few weeks back; not a few months back.
Reply
0
Old Feb 21, 2008 | 05:03 PM
Share
  #23  
steevo 8's Avatar
steevo 8
Thread Starter
Evolving Member
 
Joined: Sep 2006
Posts: 159
Likes: 0
From: new jersey
turns out the pins that hold the axles in place where never put back in...
Reply
0
Old Feb 21, 2008 | 07:27 PM
Share
  #24  
6-speed's Avatar
6-speed
Evolved Member
iTrader: (20)
 
Joined: Apr 2003
Posts: 928
Likes: 0
From: NY/Central NJ
Originally Posted by steevo 8
turns out the pins that hold the axles in place where never put back in...
Do you mean the output shafts?

Sorry to hear about your problems.
Reply
0
Old Jun 16, 2008 | 12:12 PM
Share
  #25  
insanechief's Avatar
insanechief
Evolving Member
 
Joined: Jul 2007
Posts: 373
Likes: 0
From: albuquerque New Mexico
what pins? I just removed my axles and i didnt see any pins?
Reply
0
Back to Subforum
Evo Engine / Turbo / Drivetrain
View Next Unread
YES or NO on ACT




Advanced Search

All times are GMT -7. The time now is 04:47 PM.