Should I be disappointed???
MUSTANG DYNO...The HeartBreaker....
EVO_9
GT3076_bb 28psi C16 racegas Hafe performance mani o2 setup,,44 wastegate
780 injectors 255fp
3'turboback+testpipe
Injen UICP with HKS filter and LICP e-bay intercooler stock bov
MBC
ARP head studs
ACT 6 puck
-------------------------
DYNO HERE----> http://webpages.charter.net/ant_mx6t/30r_c16_dyno.jpg
Here's my friends dybo run same dyno same mods only diff his turbo is a 60/63
to my 70/63
his run is the dotted lines,,http://webpages.charter.net/ant_mx6t/c16_dyno.jpg

 

lol you could of done that with stock turbo

 

just a lil

 

Ya I know!! The tuner said don't be disappointed!! Your on the MUSTANG DYNO...The HeartBreaker dyno,,, I made before this on the stock turbo with boltons and 100 octane 25psi I made 360 but that was on a dyno jet,,,,

 

looks like boost started to taper off around 6000 RPM.... what MBC you using?


have you done a boost leak test?

 

Dejon MBC

 

stock turbos with meth can do about 360whp on a mustang right?

I had a friend dyno 430whp on a mustang and was trapping low 11's@125
it should be a 10 sec car.


so my guess for you, yes your car is ****ed up.

 

i would be

 

i made 366 alky and stock turbo on a mustang dyno and ran 11.56 122mph

 

What do stock Evo IXs put down on this particular mustang dyno?

 

stock evos usually put down 235-240 for a IX on a mustang dyno. Don't be that sad...your 360 on a dynojet from before is more like 310-320 on a mustang.

 

Before the tune on my 91 tune on the same dyno I made 330 @21psi,,

 

I would be SOOOOOO mad... but thats personally.

 

Your#s are close to my 50trim on a mustang, but I did that with 93oct.

 

I vote boost leak due to your torque being less than hp by a significant amount. Dynos vary just like each car does. Just for reference; I made 290/289 with a 9.8 turbo and without cams/alky.