I recently installed a exedy twin hd with a shep tranny + front diff (quaife). From a stop going into first gear the front wheels like to hop a little. I don't know if it's normal for this to happen, any ideas?

I thought the quaife front diff helped stop wheel hop?

 

anyone?

 

are you talking about launching?

 

I am talking about just stopping at a light then going again. I haven't launched it yet.

 

you mean it shutters? kinda a rough shaking feeling? that is normal on a new clutch, mine still does it after 3000 miles. it will start to stop after the clutch wears in

 

you need to slip the clutch i think your dumping it a little too fast.

 

Practice letting the clutch out smoothly. The shudder will go away. Go to an empty parking lot. Start by giving a little gas 2000 rpm or so and let the clutch out slowly to get a feel of the engagement point. With practice you should be able to do it off of idle. I have the same clutch most people who drive my car cannot believe I have a twin. The pedal is soft and practice is all it takes to get it to drive like stock.

 

its the clutch. my used 25k mr clutch will still do it, normally when its cold out and im lazy to rev match

 

don't lug your car dude. Might be your downpipe hitting something

 

Poly motor mounts will stiffen up any engine movement

 

It be the clutch..you are lugging it needs a little more rpm on start with some more slipping

 

Yea give it 500 miles it should get better mine did.