p0106 problem... I've searched
Ok I'll go ahead and add myself to the thread. i'm getting a p0106 and a p0096 code. The car seems to run just fine so I'm not noticing any related symptoms of the code at all. Any updates on how you got everything taken care of? Was it the map sensor?
interesting...
driving back from Nashville on Monday, popped a P0106 code, it's my very first CEL. My prosport boost gauge sender had been on the blink for many months and finally crapped out altogether sometime during the previous weekend.
I really don't believe they are connected in any way, I checked all of my manifold/intercooler connections (ESPECIALLY the boost off the FPR!) and everything looks tight. The car kept running fine, I was halfway through a tank of Exxon 93, I refueled with Sunoco 93 and the CEL cleared itself!
So, I'm not too worried by this, but I did finally order a replacement Sender. Thought I'd add my experience to this thread, will update after the install.
driving back from Nashville on Monday, popped a P0106 code, it's my very first CEL. My prosport boost gauge sender had been on the blink for many months and finally crapped out altogether sometime during the previous weekend.
I really don't believe they are connected in any way, I checked all of my manifold/intercooler connections (ESPECIALLY the boost off the FPR!) and everything looks tight. The car kept running fine, I was halfway through a tank of Exxon 93, I refueled with Sunoco 93 and the CEL cleared itself!
So, I'm not too worried by this, but I did finally order a replacement Sender. Thought I'd add my experience to this thread, will update after the install.
Thread
Thread Starter
Forum
Replies
Last Post
RS200
Evo Engine / Turbo / Drivetrain
8
Oct 1, 2015 07:27 AM
EvoXstylin
Evo Engine / Turbo / Drivetrain
4
Mar 4, 2014 10:15 AM
Rinse
Evo Engine / Turbo / Drivetrain
1
Apr 29, 2004 09:08 AM




