My HTA37r Buschur Pump Gas Evo
Thread Starter
Evolved Member
iTrader: (13)
Joined: Jan 2006
Posts: 2,916
Likes: 1
From: Las Vegas and HATING it

Last edited by vwjeff; Jun 11, 2008 at 05:21 PM.
Thread Starter
Evolved Member
iTrader: (13)
Joined: Jan 2006
Posts: 2,916
Likes: 1
From: Las Vegas and HATING it
Mine are 11 lbs for the fronts and 7 lbs for the rear each, and they are lighter than Jeff's
You can get them from Buschur's and they will sell you the lightweight version also.
You can get them from Buschur's and they will sell you the lightweight version also.
Last edited by Indy Evo; Jun 11, 2008 at 07:23 PM.
Indy has come up with a set of better springs for the N1's from Swift. I had orignally sent a set of N1's to Indy to test. He found some good information on valving and found the springs are OK but not the best. He then tested some Swift springs and sent the comparison sheets to me for each spring. The Swifts are not only lighter they are a much better spring.
I have a set here for my car we are going to try when my car comes back out.
I have a set here for my car we are going to try when my car comes back out.
Thread Starter
Evolved Member
iTrader: (13)
Joined: Jan 2006
Posts: 2,916
Likes: 1
From: Las Vegas and HATING it


