Any Used Muse Ported Manifold?
Any Used Muse Ported Manifold?
Ok, I am thinking about getting the Muse Evo Exhaust manifold that has been ported for about $110. Has anyone bought one and know if it's good or should I just pass it??? By the way, it's from eBay.
Last edited by EvolNinja; Jun 4, 2008 at 08:52 PM. Reason: adding more info to original thread
^^^ you have been trying to sell it for about 8 months now. To the OP no it is not good. The ports on the turbo side have not been touched as you can see doesn't match up to the gasket in the pics. The inside finish looks horrible with craters all over the place which allows carbon deposits to build up. Talk to 4WS about ported manifolds.
I was actually in trouble with the mods for selling multiples on the forums. It wasn't just 1 that sold over the course of 8 months 
There are prob a couple dozen guys on this board running the manifold.
Either way, take what RevMoto says with a grain of salt, he's clearly known as the asshat of these forums and he just got his *** chewed out by buschur, ppi and indy regarding the topic of "gasket matched" porting.
The muse manifold is port matched, just as buschur's is along with ppi's.
There are prob a couple dozen guys on this board running the manifold.
Either way, take what RevMoto says with a grain of salt, he's clearly known as the asshat of these forums and he just got his *** chewed out by buschur, ppi and indy regarding the topic of "gasket matched" porting.
The muse manifold is port matched, just as buschur's is along with ppi's.
sorry bro but muse manifold is not like ppi or buschur , and rev moto knows what hes talking about also he ports manifolds so he knows when its done right or wrong bro!!!!!
was up Rev
was up Rev
Trending Topics
Thank for getting my back. tvieira24 don't get all upset because I shot down a product you like. I have not been told off by those vendors. You can choose a side. This is a public forum so you are entitled to your opinion. For the record I port match also. But back on topic, yes the MUSE manifold is port matched but as I stated they did not finish the job. Thanks to your pics you have showed us how the manifold lacks compared to our evom companies. Anytime you want to put that MUSE manifold up to a comparison against one that is done right you let me know.
Last edited by RevMoto; Jun 12, 2008 at 08:47 PM.
Just because you're ignorant on the subject doesn't mean you should but blind faith into someone who's flaud concept of fluid dynamics goes against AND has been shot down by more experienced members on this board such as Dave B.Either way, both manifolds don't fall under the same category. The muse manifold is a manifold that was ported then cast opposed to where buschur and PPI are ported after a manifold has been cast. The buschur and ppi option are clearly going to be smoother inside due to the fact that they are not in their cast state.
Claiming the manifolds runners and collectors aren't ported is clearly incorrect if and proves you've never compared a well ported manifold to a same muse manifold.
Rev,
Just because you remove 90% of the material everywhere on your half *** ported manifolds doesn't mean they are superior to people who have perfected the art AND know what makes proven power. Acting like an ******* in every thread is a poor way to advertise your porting services.
I have used it and have since gone w/ a megan tubular, but when i got mine from tvieira24 it was alot better than stock and I had none of these probs that other people are saying they have seen, but this was just one mine of course. I cant speak for other people. I only ran mine for a month or so, but I could tell a difference over my bone stock manifold, if that helps? Just buy a Megan tubular or something or buy this and port it. 
Just buy a Megan tubular or something or buy this and port it.
It's cute that you have to defend your girlfriend but he's a big boy and can fight his own battles Just because you're ignorant on the subject doesn't mean you should but blind faith into someone who's flaud concept of fluid dynamics goes against AND has been shot down by more experienced members on this board such as Dave B.
Either way, both manifolds don't fall under the same category. The muse manifold is a manifold that was ported then cast opposed to where buschur and PPI are ported after a manifold has been cast. The buschur and ppi option are clearly going to be smoother inside due to the fact that they are not in their cast state.
Claiming the manifolds runners and collectors aren't ported is clearly incorrect if and proves you've never compared a well ported manifold to a same muse manifold.
Rev,
Just because you remove 90% of the material everywhere on your half *** ported manifolds doesn't mean they are superior to people who have perfected the art AND know what makes proven power. Acting like an ******* in every thread is a poor way to advertise your porting services.
Just because you're ignorant on the subject doesn't mean you should but blind faith into someone who's flaud concept of fluid dynamics goes against AND has been shot down by more experienced members on this board such as Dave B.Either way, both manifolds don't fall under the same category. The muse manifold is a manifold that was ported then cast opposed to where buschur and PPI are ported after a manifold has been cast. The buschur and ppi option are clearly going to be smoother inside due to the fact that they are not in their cast state.
Claiming the manifolds runners and collectors aren't ported is clearly incorrect if and proves you've never compared a well ported manifold to a same muse manifold.
Rev,
Just because you remove 90% of the material everywhere on your half *** ported manifolds doesn't mean they are superior to people who have perfected the art AND know what makes proven power. Acting like an ******* in every thread is a poor way to advertise your porting services.
Rev,
Just because you remove 90% of the material everywhere on your half *** ported manifolds doesn't mean they are superior to people who have perfected the art AND know what makes proven power. Acting like an ******* in every thread is a poor way to advertise your porting services.
Just because you remove 90% of the material everywhere on your half *** ported manifolds doesn't mean they are superior to people who have perfected the art AND know what makes proven power. Acting like an ******* in every thread is a poor way to advertise your porting services.
I take what everyone on this board says with a grain of salt. Im getting me a muse manifold or a megan or that other one, I dont know anymore I'm asking the almighty know it all of all know it alls Mr. David B.
Last edited by huevosrancheros; Jun 12, 2008 at 09:25 PM.
