A full 37r build top to bottom...COMPLETE!
Aug 20, 2008, 11:02 AM
#93
Evolved Member
iTrader: (2)
Join Date: Apr 2004
Location: Milwaukee, WI
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
Oh, one last thing... if you're going to mate up any braided lines to existing piping (like coolant / oil), weld the ends on before you put the motor back in the car.
Aug 24, 2008, 09:25 AM
#97
Didnt take pics of the clutch yet. Unless you want them of it still in the box.
Anyways, I got most of the motor together for a mock-up to see if I retained all of the bolts and things getting moved around 3 times.
Before anyone says anything I just noticed the alternator bracket is on wrong.
Anyways, I got most of the motor together for a mock-up to see if I retained all of the bolts and things getting moved around 3 times.
Before anyone says anything I just noticed the alternator bracket is on wrong.
Aug 25, 2008, 05:54 PM
#99
The block is clean. Just got done cleaning the valve cover.
As for the smokes, well the can is empty. When I get another one Im going to weld the 2 together and make a bar stool out of it. I already have an old seats from my previous bar set.
Aug 25, 2008, 07:53 PM
#103
Evolved Member
iTrader: (6)
Join Date: Sep 2003
Location: Knoxville Tennessee
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
Looks like an awesome build though. Bringing back very tiring/frustrating memories to when I did my build lol
BTW I ended up putting the engine/tranny back in from the bottom and it wasnt too bad. I'm sure you can do it from the top too but I didnt have another person/helper and wasnt too hard and didnt take too long.
Last edited by Johnboy1065; Aug 25, 2008 at 07:56 PM.
