EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

best way to drive with no tune?

Thread Tools
 
Search this Thread
 
Old Sep 26, 2008 | 02:41 PM
Share
  #1  
BorisTheBlade's Avatar
BorisTheBlade
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Feb 2008
Posts: 147
Likes: 0
From: Ohio
best way to drive with no tune?
Im putting my FP red in with 680 cc injectors and i need a way to safely get it to buschur for a tune, without towing it haha. any ideas?
Reply
0
Old Sep 26, 2008 | 02:41 PM
Share
  #2  
btownsoccer22's Avatar
btownsoccer22
Evolved Member
iTrader: (6)
 
Joined: Apr 2008
Posts: 1,004
Likes: 0
From: Indiana
not go into boost
Reply
0
Old Sep 26, 2008 | 02:41 PM
Share
  #3  
mykrofon's Avatar
mykrofon
Account Disabled
iTrader: (5)
 
Joined: Nov 2007
Posts: 128
Likes: 0
From: florida
cant put it better myself lol
Reply
0
Old Sep 26, 2008 | 02:42 PM
Share
  #4  
BorisTheBlade's Avatar
BorisTheBlade
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Feb 2008
Posts: 147
Likes: 0
From: Ohio
so just drive very conservatively?
Reply
0
Old Sep 26, 2008 | 02:43 PM
Share
  #5  
btownsoccer22's Avatar
btownsoccer22
Evolved Member
iTrader: (6)
 
Joined: Apr 2008
Posts: 1,004
Likes: 0
From: Indiana
yea...drive like your a grandma
Reply
0
Old Sep 26, 2008 | 02:46 PM
Share
  #6  
Erik@MIL.SPEC's Avatar
Erik@MIL.SPEC
Former Sponsor
iTrader: (94)
 
Joined: Dec 2001
Posts: 5,695
Likes: 24
From: Los Angeles
Hopefully you have a boost gauge. If you do, keep it in vacuum.

Or, if you don't have a boost gauge drive like a grandma and don't boost.
Reply
0
Old Sep 26, 2008 | 02:47 PM
Share
  #7  
JDM4G64T's Avatar
JDM4G64T
Newbie
 
Joined: Apr 2008
Posts: 79
Likes: 0
From: O-town Fl.
^^ Couldn't of said it better myself......
Reply
0

Trending Topics

Old Sep 26, 2008 | 02:57 PM
Share
  #8  
h22gordo's Avatar
h22gordo
Evolved Member
iTrader: (18)
 
Joined: Oct 2004
Posts: 1,493
Likes: 3
Shift between 2000-3000 rpm all the way there!
No boost! You will be fine, no worries.
Reply
0
Old Sep 26, 2008 | 03:24 PM
Share
  #9  
BorisTheBlade's Avatar
BorisTheBlade
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Feb 2008
Posts: 147
Likes: 0
From: Ohio
i do have a boost gauge, so ill just not let it go into boost, its only an hour drive and its on all country roads. thanks everyone!
Reply
0
Old Sep 26, 2008 | 04:17 PM
Share
  #10  
racer135's Avatar
racer135
Evolved Member
iTrader: (2)
 
Joined: Nov 2007
Posts: 819
Likes: 1
From: Puerto Rico
Connect the turbo pipe outlet directly to the WG and run at WG Pressure. Or if you have a MBC remove the ball and spring to run at WG Pressure at the most.
Reply
0
Old Sep 27, 2008 | 04:13 AM
Share
  #11  
06 SPOOoL's Avatar
06 SPOOoL
Evolving Member
 
Joined: May 2008
Posts: 100
Likes: 0
From: Las Vegas
no boooooost.......
Reply
0
Old Sep 27, 2008 | 09:49 AM
Share
  #12  
Eviil8's Avatar
Eviil8
Newbie
iTrader: (3)
 
Joined: Jul 2008
Posts: 33
Likes: 0
From: Chesapeake, VA
as everyone one else says, just stay out of boost. it may run rough with the bigger injectors though
Reply
0
Old Sep 27, 2008 | 09:50 AM
Share
  #13  
Eviil8's Avatar
Eviil8
Newbie
iTrader: (3)
 
Joined: Jul 2008
Posts: 33
Likes: 0
From: Chesapeake, VA
by the way you should go bigger than 680 cc , at least 880 cc with that turbo
Reply
0
Old Sep 27, 2008 | 09:50 AM
Share
  #14  
vvhiteix's Avatar
vvhiteix
Evolving Member
iTrader: (10)
 
Joined: Nov 2007
Posts: 453
Likes: 0
From: New Jersey
yea...with those bigger injectors not scaled...you might have some issues... but... once it gets tuned it'll be worth it
Reply
0
Old Sep 27, 2008 | 09:56 AM
Share
  #15  
mugen777's Avatar
mugen777
Evolving Member
iTrader: (16)
 
Joined: May 2007
Posts: 338
Likes: 0
From: Cleveland, TN
check out the thread on scaling injectors.... if you have a tactrix cable and ecuflash and feel comfortable doing so.... scale the injectors and the latencies and you will be fine
Reply
0



Advanced Search

All times are GMT -7. The time now is 02:14 PM.