637whp @ 30 PSI (video inside!)
637whp @ 30 PSI (video inside!)
Welp, the build is finally finished.
Had it put on the dyno today, with a few different octanes.
had some 92/93 octane, some E-85 and of course some Q16
Unfortunately the whole pump tune and E85 tune was done with only one of my fuel pumps turned on thanks to a inline fuse that was not there
Afterwards on Q16 the car started pulling hard and ran into some boost issues. Car started falling off VERY hard at anything over 30 PSI. would spike 35 psi instantly and only hold 30
.. Car made 637whp @ about 30psi...
Hoping its something simple as a boost leak, and have it taken care of this week.
And back on the dyno before the track this sunday!!!!
Here is a quick video of it... Does not do it justice, a lot louder and faster in person
After this is fixed i imagine after another 8/10 psi i should crank out my 715+whp that i was interested in to begin with!!!
Thanks to nate @ TPG tuning for doing what he can with what i had!

Quick run down of mods....
built 2.0
built head
ETS GT37r
ETS 3.5" TBE
ETS 4.5" FMIC
AMS 1000 hp fuel system
NGK plugs/wires
AEM EMS
Exedy Triple disk
Thanks for looking, and stay tuned for updates!!!!!
Had it put on the dyno today, with a few different octanes.
had some 92/93 octane, some E-85 and of course some Q16
Unfortunately the whole pump tune and E85 tune was done with only one of my fuel pumps turned on thanks to a inline fuse that was not there
Afterwards on Q16 the car started pulling hard and ran into some boost issues. Car started falling off VERY hard at anything over 30 PSI. would spike 35 psi instantly and only hold 30
.. Car made 637whp @ about 30psi... Hoping its something simple as a boost leak, and have it taken care of this week.
And back on the dyno before the track this sunday!!!!
Here is a quick video of it... Does not do it justice, a lot louder and faster in person
After this is fixed i imagine after another 8/10 psi i should crank out my 715+whp that i was interested in to begin with!!!
Thanks to nate @ TPG tuning for doing what he can with what i had!

Quick run down of mods....
built 2.0
built head
ETS GT37r
ETS 3.5" TBE
ETS 4.5" FMIC
AMS 1000 hp fuel system
NGK plugs/wires
AEM EMS
Exedy Triple disk
Thanks for looking, and stay tuned for updates!!!!!
Trending Topics
haha, thats what the plan was.. Might put some suspension on it, but thats about it...
Its not enough just yet, when the pump was not running i was 110% on 22 psi making 544 on E85 lol going to retune and aim for 30/31 on it!!!!
Will keep ya updated on the numbers, gotta try your idea first!
Thank you for looking!
Originally Posted by Paul Nelson
Awesome! Nice to see my old Turbo making some power. Now put a AEM Boost Solenoid on
Will keep ya updated on the numbers, gotta try your idea first!
Originally Posted by zasboy
Awesome video. Thanks for posting it up.
Thread
Thread Starter
Forum
Replies
Last Post
Peteypab2133
Evo Engine / Turbo / Drivetrain
26
Sep 17, 2008 11:27 AM
Peteypab2133
Evo General
32
Feb 21, 2007 11:49 PM



