I hope this Intake Manifold will bring me to 10's!(pics)
I hope this Intake Manifold will bring me to 10's!(pics)
UPS dropped it today
Driven Innovation stock tb flange. All I can say is WOW!
It's really a piece of art!
Welds are so sexy!
Previously I ran 11.0sec@130mph(street tires) 34psi boost on Sunnoco 116 octane on a conservative tune. Im hoping with these manifold and Q16 @ 35psi will bring me to deep 10's. https://www.evolutionm.net/forums/sh...d.php?t=380482
I guess time to get serious this time. Motorcycle slicks, AWD Driveshaft are also coming soon.
Next to little EVOVIN!(7weeks old)
mod list:
Ported head
HKS 280's
1200c injectors
2.0 Wiseco Pistons
Eagle H Beams
Shep T-case
Shep Tranny
Exedy Twin HD
AEM EMS 5 bar map sensor
ETS 3.5 FMIC
BR HTA37R
BR UICP
BR double pumper
FG LICP
Tial 44mm WG
Tial 50mm bov
HKS DLI
*DI manifold=To be installed
*FP 5R Cams =To be installed
Driven Innovation stock tb flange. All I can say is WOW!
It's really a piece of art!
Welds are so sexy!
Previously I ran 11.0sec@130mph(street tires) 34psi boost on Sunnoco 116 octane on a conservative tune. Im hoping with these manifold and Q16 @ 35psi will bring me to deep 10's. https://www.evolutionm.net/forums/sh...d.php?t=380482
I guess time to get serious this time. Motorcycle slicks, AWD Driveshaft are also coming soon.
Next to little EVOVIN!(7weeks old)
mod list:
Ported head
HKS 280's
1200c injectors
2.0 Wiseco Pistons
Eagle H Beams
Shep T-case
Shep Tranny
Exedy Twin HD
AEM EMS 5 bar map sensor
ETS 3.5 FMIC
BR HTA37R
BR UICP
BR double pumper
FG LICP
Tial 44mm WG
Tial 50mm bov
HKS DLI
*DI manifold=To be installed
*FP 5R Cams =To be installed
Last edited by evovin; Nov 21, 2008 at 10:54 AM.
Trending Topics
Last pic is Priceless!!!
You already have enought MPH to put you in the deep 10's!!! Manifold performs as well as it looks! You will not be dissapointed!
I will tell you this much, there is no manifold out there that will give you both better mid and topend power!!!
Thank you for support!!!
Ohh give me a call regarding you PM!
You already have enought MPH to put you in the deep 10's!!! Manifold performs as well as it looks! You will not be dissapointed!
I will tell you this much, there is no manifold out there that will give you both better mid and topend power!!!
Thank you for support!!!
Ohh give me a call regarding you PM!
Last edited by Driven Innovations; Nov 21, 2008 at 09:53 AM.
Great pic of your new toy and your son 
I don't think you'll have any problems making more hp to go into the 10's but more like traction to do so.
You could actually hit 10's already w/ your hp level.
What kind of 60 ft on the 11.0@130 run?
I don't think you'll have any problems making more hp to go into the 10's but more like traction to do so.
You could actually hit 10's already w/ your hp level.
What kind of 60 ft on the 11.0@130 run?
1.70 here is the link (vid/pics) https://www.evolutionm.net/forums/sh...d.php?t=380482
Good luck bud
That should do the trick.
I know Mellon had some trouble with those m/c slicks do you know of him and if he was able to get them to work.
They are obviously proven by the Buschur guys and the boys down in PR.
I would have tried them out but went a diff route.
I know Mellon had some trouble with those m/c slicks do you know of him and if he was able to get them to work.
They are obviously proven by the Buschur guys and the boys down in PR.
I would have tried them out but went a diff route.