Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

QuarterMaster Twin Disc 7.25" V-Drive Clutch / Flywheel (DSM)

Thread Tools
 
Search this Thread
 
Old Feb 15, 2009 | 01:05 PM
  #31  
maperformance's Avatar
Former Sponsor
iTrader: (358)
 
Joined: Feb 2007
Posts: 12,805
Likes: 20
From: Cottage Grove, MN
We have yet to find the limits of this clutch. Strictly Modified in Chicago, has this clutch on their 900HP+ EVO.

http://www.youtube.com/watch?v=pUK6q_Mqdhc

The disk size of the Quartermaster is pretty thick, but I can't compare to the Tilton because I haven't had the chance to hold them both in my hand and have a caliper on the Tilton.

Rebuilding for the clutch starts around $290.00 shipped. Usually people need different parts to replace. Just shoot me a pm!
Reply
Old Feb 15, 2009 | 01:14 PM
  #32  
redleg225's Avatar
Evolved Member
15 Year Member
Photogenic
iTrader: (14)
 
Joined: Aug 2007
Posts: 815
Likes: 0
From: M104
This is a sign. Yesterday my buddy sent me a link to maperformance containing this. I'm going to buy a shep trans and get this clutch, like tomorrow (shep is closed on weekends). haha
Reply
Old Feb 15, 2009 | 02:09 PM
  #33  
WHTEVO's Avatar
Evolved Member
20 Year Member
iTrader: (18)
 
Joined: Apr 2004
Posts: 1,307
Likes: 0
From: COLORADO
So any other high HP Evo's on here running this clutch?

I have been trying to narrow it down from Carbonetics triple plate, Exedy triple cerametallic and this QM one.
Reply
Old Feb 15, 2009 | 02:14 PM
  #34  
maperformance's Avatar
Former Sponsor
iTrader: (358)
 
Joined: Feb 2007
Posts: 12,805
Likes: 20
From: Cottage Grove, MN
There is a few of my customers on here running this clutch on 700+ and even some on 400-500.

We have this clutch on a 91 AWD talon (Same kit just different hubs) hold 794Awhp.
Reply
Old Feb 15, 2009 | 02:15 PM
  #35  
maperformance's Avatar
Former Sponsor
iTrader: (358)
 
Joined: Feb 2007
Posts: 12,805
Likes: 20
From: Cottage Grove, MN
Originally Posted by olmoscd
This is a sign. Yesterday my buddy sent me a link to maperformance containing this. I'm going to buy a shep trans and get this clutch, like tomorrow (shep is closed on weekends). haha

Give me a call or shoot me a pm! I have special pricing available.


-Adam
Reply
Old Feb 15, 2009 | 02:51 PM
  #36  
WHTEVO's Avatar
Evolved Member
20 Year Member
iTrader: (18)
 
Joined: Apr 2004
Posts: 1,307
Likes: 0
From: COLORADO
Pm'd
Reply
Old Feb 15, 2009 | 02:58 PM
  #37  
11secDSM's Avatar
Evolved Member
iTrader: (30)
 
Joined: Nov 2003
Posts: 606
Likes: 0
From: Warrington, PA
I've daily driven the QM twin in my Evo for about 20k miles. You get used to it quick. I honestly forgot about the engagement harshness after a while.
Reply
Old Feb 15, 2009 | 03:04 PM
  #38  
WHTEVO's Avatar
Evolved Member
20 Year Member
iTrader: (18)
 
Joined: Apr 2004
Posts: 1,307
Likes: 0
From: COLORADO
Keep the comments coming. I am starting to lean more towards this one and not the Carbonetics triple and Exedy triple cerametallic. Holding alot of power is needed as well.
Reply
Old Feb 15, 2009 | 03:45 PM
  #39  
EvoDan2004's Avatar
Evolved Member
iTrader: (94)
 
Joined: Feb 2005
Posts: 8,984
Likes: 8
From: New Jersey
Originally Posted by maperformance
We have yet to find the limits of this clutch. Strictly Modified in Chicago, has this clutch on their 900HP+ EVO.

http://www.youtube.com/watch?v=pUK6q_Mqdhc

The disk size of the Quartermaster is pretty thick, but I can't compare to the Tilton because I haven't had the chance to hold them both in my hand and have a caliper on the Tilton.

Rebuilding for the clutch starts around $290.00 shipped. Usually people need different parts to replace. Just shoot me a pm!

681 trq not bad. now the question is how long can it hold that???
Reply
Old Feb 15, 2009 | 05:20 PM
  #40  
APM Racing's Avatar
Former Sponsor
iTrader: (4)
 
Joined: Feb 2009
Posts: 285
Likes: 0
From: Elmhurst, Illinois
The quartermaster clutch is the ONLY clutch that we have used in our high hp evo's over the years. We have tested this clutch to upwards of 937awhp and it didnt skip a beat. We currently have 3 sets IN STOCK

PM me for the best price shipped to your door!
Reply
Old Feb 16, 2009 | 05:11 AM
  #41  
Jasil's Avatar
Evolved Member
iTrader: (22)
 
Joined: May 2005
Posts: 2,327
Likes: 1
From: NO
Originally Posted by evodan2004
681 trq not bad. now the question is how long can it hold that???
I don't think you will ever find your answer. It's almost like you are looking for a guarantee that the clutch will last 30k miles and hold 600ft/tq.

It's a good clutch and 1/3 the price of a tilton. How long will it hold who knows it could last 5k it could last 20k+.
Reply
Old Feb 16, 2009 | 06:23 AM
  #42  
EvoDan2004's Avatar
Evolved Member
iTrader: (94)
 
Joined: Feb 2005
Posts: 8,984
Likes: 8
From: New Jersey
Originally Posted by Jasil
I don't think you will ever find your answer. It's almost like you are looking for a guarantee that the clutch will last 30k miles and hold 600ft/tq.

It's a good clutch and 1/3 the price of a tilton. How long will it hold who knows it could last 5k it could last 20k+.

HAHA yor right but wrong. i just want to make sue its not gona burn up on me where i feel it was a waste to begin with.

map and apm racing.
pm me your best prices shipped to nj07843. and we can go from there.
Reply
Old Feb 16, 2009 | 08:48 AM
  #43  
Bimmubishi's Avatar
Account Disabled
iTrader: (3)
 
Joined: Oct 2003
Posts: 764
Likes: 1
From: Boston
I have two almost new disks for sale for early evo/dsm if anyone wants them. I am using a dogbox now which uses a larger broach so I can't use the normal disks.

They retail for $360 and I'm looking for $150.

Alex
Reply
Old Feb 16, 2009 | 09:44 AM
  #44  
Nissan2Evo's Avatar
Evolved Member
iTrader: (23)
 
Joined: Feb 2007
Posts: 541
Likes: 0
From: San Antonio, Tx
I just my placed my order with Adam over @ MAPerformance for the Quartermaster. I'm confident this clutch setup will be up to the task of putting my power to the ground and not let me down in the middle of a race I'll post a review once installed.

Jorge R.
Reply
Old Feb 16, 2009 | 12:48 PM
  #45  
maperformance's Avatar
Former Sponsor
iTrader: (358)
 
Joined: Feb 2007
Posts: 12,805
Likes: 20
From: Cottage Grove, MN
Jorge,

Thanks again for your order! I appreciate it. Anyone else need one give me a shout!
Reply



All times are GMT -7. The time now is 11:12 PM.