Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

What o2 housing to choose???

Thread Tools
 
Search this Thread
 
Old Feb 3, 2009 | 07:49 PM
  #16  
EvoDom's Avatar
Evolved Member
iTrader: (7)
 
Joined: Oct 2007
Posts: 1,238
Likes: 0
From: Joisey Shore
you would be stupid not to get an Evopowermods o2 dump.....they make crazy power and sound absolutly wicked.

it sounds like a ful blown 35r car with a tial 44mm wastgate.

get the EPM o2 dump and you wont ever look at an o2 housing.

and if thats to loud for you, then just go for the megan, very good peice.
Reply
Old Feb 3, 2009 | 08:47 PM
  #17  
ModifiedMR's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Aug 2005
Posts: 299
Likes: 0
From: Toms River NJ
not sure my car has an aggressive enough set up for that
Reply
Old Feb 3, 2009 | 08:49 PM
  #18  
ev0lution9's Avatar
Evolving Member
iTrader: (3)
 
Joined: Mar 2008
Posts: 479
Likes: 0
From: Staten Island
i have the invidia and no complaints here it definitely does its job
Reply
Old Feb 3, 2009 | 08:53 PM
  #19  
David24's Avatar
Evolving Member
iTrader: (50)
 
Joined: Jan 2009
Posts: 163
Likes: 0
From: Colorado
You should get the Buschur fabricated one. I run that on my car, it looks great and fits very well. Those Megan and Ebay ones will probably crack over time due to lack of quality. Go with a trusted name that's done their research.
Reply
Old Feb 3, 2009 | 09:04 PM
  #20  
justnwynn's Avatar
Newbie
iTrader: (2)
 
Joined: Oct 2007
Posts: 37
Likes: 0
From: bossier city, la
Originally Posted by ModifiedMR
not sure my car has an aggressive enough set up for that
do you have to have an aggresive setup to utilize an o2 dump?
just curious
Reply
Old Feb 3, 2009 | 09:57 PM
  #21  
mrfred's Avatar
EvoM Guru
iTrader: (50)
 
Joined: Mar 2006
Posts: 9,675
Likes: 132
From: Tri-Cities, WA // Portland, OR
Originally Posted by David24
You should get the Buschur fabricated one. I run that on my car, it looks great and fits very well. Those Megan and Ebay ones will probably crack over time due to lack of quality. Go with a trusted name that's done their research.
Don't mean to burst your bubble but the Buschur "fabricated" O2 housing is a Megan/Ebay housing. They are 100% the same.
Reply
Old Feb 4, 2009 | 02:37 AM
  #22  
racer135's Avatar
Evolved Member
iTrader: (2)
 
Joined: Nov 2007
Posts: 819
Likes: 1
From: Puerto Rico
Originally Posted by mrfred
Don't mean to burst your bubble but the Buschur "fabricated" O2 housing is a Megan/Ebay housing. They are 100% the same.
Exactly. They just coat it.
Reply
Old Feb 4, 2009 | 01:36 PM
  #23  
fqjdmct9a's Avatar
Evolved Member
iTrader: (21)
 
Joined: Jun 2008
Posts: 555
Likes: 0
From: Orlando, FL
yeah im in the same boat i am looking to get either the Invidia, Titek or Helix??? if i can get some more info from any of these i will apreiciate it alot!
Reply
Old Feb 4, 2009 | 01:49 PM
  #24  
4xforce's Avatar
Evolved Member
iTrader: (25)
 
Joined: Jan 2007
Posts: 536
Likes: 1
From: norcal
Just installed the EPM o2 dump. Was afraid it might be too loud.... Well its loud BUT only when you are getting on it good which you really shouldn't care how loud it is when you are doing that. Awesome power increase and I only have a TBE and intake. It made a huge difference throughout the powerband not just up top and the nice quality piece not to mention you can't get better customer service then the guys at EPM. I will be doing a thread on my experince with them in the days to come. My only choices would be.....Cheap (Megan/Ebay), Expensive but well worth it (Works exhale o2 housing) Big power but makes itself know to all when WG opens (EPM o2 dump). I believe the Works piece is the only o2 housing on the market with a true 3 inch outlet but you have to use their downpipe I believe. Hope this helps.
Reply
Old Feb 4, 2009 | 03:06 PM
  #25  
mrfred's Avatar
EvoM Guru
iTrader: (50)
 
Joined: Mar 2006
Posts: 9,675
Likes: 132
From: Tri-Cities, WA // Portland, OR
Originally Posted by fqjdmct9a
yeah im in the same boat i am looking to get either the Invidia, Titek or Helix??? if i can get some more info from any of these i will apreiciate it alot!
The Titek is definitely the most well made of the three.
Reply
Old Feb 4, 2009 | 04:09 PM
  #26  
ModifiedMR's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Aug 2005
Posts: 299
Likes: 0
From: Toms River NJ
from whats been said im thinkin the titek will be my choice
Reply
Old Feb 4, 2009 | 05:10 PM
  #27  
Q@EvoPowerMods's Avatar
Former Sponsor
iTrader: (23)
 
Joined: Jan 2007
Posts: 812
Likes: 0
From: In the Shop in Alabama
Originally Posted by 4xforce
Just installed the EPM o2 dump. Was afraid it might be too loud.... Well its loud BUT only when you are getting on it good which you really shouldn't care how loud it is when you are doing that. Awesome power increase and I only have a TBE and intake. It made a huge difference throughout the powerband not just up top and the nice quality piece not to mention you can't get better customer service then the guys at EPM. I will be doing a thread on my experince with them in the days to come. My only choices would be.....Cheap (Megan/Ebay), Expensive but well worth it (Works exhale o2 housing) Big power but makes itself know to all when WG opens (EPM o2 dump). I believe the Works piece is the only o2 housing on the market with a true 3 inch outlet but you have to use their downpipe I believe. Hope this helps.
Thnxx for the props..we do our best...I believe we are STILL the ONLY company to show Data publicly that our product gains power. 100% handcrafted in the USA fully TIG welded with a 100% guarantee. If you want the best, most power producing O2 Housing then EPM is the way to go. Installed and performing on the World's Record holding Stock9Turbo Evo. And countless other ultra high horsepower, daily driven monster Evos.

Yes; the sound is awesome but only at WOT
Reply
Old Feb 4, 2009 | 05:13 PM
  #28  
ExViTermini's Avatar
Evolved Member
iTrader: (25)
 
Joined: Jan 2005
Posts: 1,761
Likes: 13
From: Virginia
What do you think it would do to the power if you routed it down and recirc'd it in the downpipe?
Reply
Old Feb 4, 2009 | 06:53 PM
  #29  
ModifiedMR's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Aug 2005
Posts: 299
Likes: 0
From: Toms River NJ
Does have the wastegate dump right into the atmosphere like that cause it to fail inspection for emissions? I feel as if it would.
Reply
Old Feb 4, 2009 | 06:58 PM
  #30  
boosted9's Avatar
Newbie
15 Year Member
iTrader: (3)
 
Joined: Oct 2007
Posts: 57
Likes: 0
From: Lowell, MA
i got the qtp..sounds nice!!
Reply



All times are GMT -7. The time now is 08:08 AM.