I have an '05 evo, and I'm lookin' to make some decent power on pump gas... I currently have a stock block! I have an AMS IC, Buschur TBE, K&N drop-in filter, Walbro pump, thats bout it...I really want to go with the FP Red turbo. I was thinking FP4R cams to go with that, some 850ish cc injectors. I want to keep the stock ecu as well...If I push like 30 psi on 93oct, will I just be asking for trouble? If not, what kinda #s can be made with these mods...? Thanks for ur time!! Let me know if I left out any needed info...

 

It will last ONLY WITH A GOOD TUNE.

 

AWD is prbly the biggest name near me...good choice?

 

yes, great choice.

my motor has been lasting perfectly making over 500. im shooting to touch over 600 come spring, see what happens then.

tune will make or break ya

 

Mike is a good guy, give him a call.

 

You will probably need a bigger set of injectors and you might want to try a set of kelford 272's. Other then that get your self a good tune...



-Em

 

Get 1000 Injectors to be safe, get your self a LEGIT Tune, and you will be set.
Just don't get all those mods you want then you drive the car around, revvng it to 7-7.5k RMPs with out a tune. You will seriously and eventually mess something up.

 

You will be good but I don't know for how long

 

do it right the first time cause it cost alot more to do over again

 

Awesome!! Thanks for the info fellas! I've seen it done, I just didnt know if thise cars were "dyno queens" or if they were actually driven like that...I planned on FP4R's simply because they are made by the same company as the turbo I want...Im sure most 272's will do the job tho...? Thanks again for the feedback, its always good to hear (read) those kinda replies...