I'm trying to put together an oil cooler set up for my car. I need to know the thread and pitch of the wholes where the stock oil cooler lines attach to the engine.

Thanks in advance for the expertise

 

Nobody knows huh?....sucks

 

patience, and search, the info is on the board somewhere
M18x1.5, make sure you get a good seal, suggest dowty/oem style
factory is banjo, people have used m18 to an converters, but space is a little tight around the filter
ams makes a kit, it is just as expensive to build your own unless you have sponsors for fittings and coolers
http://www.amsperformance.com/cart/A...mance.com.html
if going the diy route
batinc.net has banjos
prefer xrp or aeroquip hose ends
most of the others seem to weep around the swirl seals

 

thanks for your help, and i did search but for whatever reason was unsuccessful.

Now with the title of this thread, hopefully others will have an easier time of it, thanks to your knowledge