Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Gay boosting prob...need advice.

Thread Tools
 
Search this Thread
 
Old May 16, 2009 | 03:00 PM
  #1  
MattyBoyMR's Avatar
Thread Starter
Evolving Member
iTrader: (21)
 
Joined: Aug 2008
Posts: 176
Likes: 2
From: ocala
Gay boosting prob...need advice.

Ok well here whats happening.

1st and 2nd gear ill spike 27psi, im tuned for 27. Then it will drop back to 19psi. But as soon as i hit 3rd 4th and 5th...its just a steady 19 psi. Im running a AEM tru boost. Do yall think its my wastegate placement? its off the merge collector on the manifold....Im running a gt35r with a tial 38mm wg, with 18psi spring, boost leaked it and it was all good and yes still stock ecu

Last edited by MattyBoyMR; May 16, 2009 at 04:37 PM.
Reply
Old May 16, 2009 | 03:30 PM
  #2  
Evo8Emperor's Avatar
Evolved Member
iTrader: (12)
 
Joined: Oct 2007
Posts: 1,317
Likes: 1
From: Rhode Island
You dont give enough information like what turbo set up your running or what boost control method your using also. Also what lbs spring in your waste gate so you know what waste gate boost is ? Also still using the stock ecu ?

boost leak test is always the easiest and cheapiest thing to do first before anything.
Reply
Old May 16, 2009 | 05:01 PM
  #3  
C6C6CH3vo's Avatar
Evolved Member
iTrader: (9)
 
Joined: Feb 2005
Posts: 4,223
Likes: 4
From: sc
If there's a spring loaded boost controller going to the ext WG, then the bleed could be clogged
Reply




All times are GMT -7. The time now is 09:49 PM.