Hi Guys-

I have the Perrin 4.5" Filter w/Vibrant special maf adapter.. The MAF adapter did not come with any bolts to mount it.. so I just used regular evo 10mm bolts with nuts (4 of them to mount the maf to the adapter).. The Problem I am having is that it appears that the filter is NOT sitting flush with the MAF adapter because of the bolt head being in the way.. Since this adapter didn't come with any hardware, what style of bolts and nuts are you guys using for the filter to sit flush and clear the maf adapter? Again, I am just using longer stock 10mm bolts with the Hex head.. If you could take a picture of what you're using, that would be great also.. Thanks a lot!

 

I had the same problem, I used some countersunk screws like these...

 

Some small hex cap bolts also work well.

 

This works fine

 

ooo nice little bracket you have there Indy to keep the filter from lying on the ACD reservoir and whatever other crap is over there...BTW How long is that bracket and at what measurement is the bend? Thanks Indy...

 

Thats the old bracket, we have a much nicer one now and will be selling them in two weeks.

 

haha since you are going to be selling them I'm assuming you won't tell me how long the bracket is and at what measurement the bend is?? haha...

 

When you see it, you will want one .

 

haha damn it...it is a bracket/heat shield combo?? please say yes...


PS sorry for hijacking your thread boost3dxevo...

 

^^That is exactly what I was hoping for also!

 

No Problem guys on the thread jacks.. Every one answered my questions already.. Thanks a lot guys!!! Indy, great looking part!!!

 

The bracket in the photo is not mine, when you see the new one you will know it came from me.

 

Oh, I'm sorry.. what I meant to say is that I'm sure your piece will be very nice considering all of the other parts you have crafted

 

I got some machine screws and they worked great. thanks guys

 

Perrin already sells a mount/heatshield/MAF adapter unit.