Hey all, I have an 06 IX and it isn't keeping ATF in the reservoir. If I fill it up even with the car off, the fluid level will eventually drop down to nothing. I have yet to find any obvious leaks. At one point I put in so much fluid and then ran the pump that fluid started pissin' out of the breather(NOT the bleeder) on the transfer case. I was wondering if there were any more obvious places for me to look before I drop the transfer case and check the seals out... Thanks for any and all help.

 

I'm lost, where is it "pissin" from?

 

At first I thought it was pissin from the breather on the transfer case(pic attached to this post), but it isn't. I'll put fluid in the reservoir but won't see any fluid coming out from anywhere obvious.

 

Most likely it will be on the banjo bolt on the t-case.

 

What is the banjo bolt?

 

 

This is where it is located on the t-case. You will see a rubber hose attached to the bolt following your rear driveline.