PT6262 in ... FP Red out
#1
PT6262 in ... FP Red out
Installed a used Buschur tubular PT6262 kit today and took off the FP Red. It needed a fair amount of customization to fit nicely...
Hopefully get a change to dyno tune it on Monday or Tuesday.
- We removed the MAF honeycomb to make sure it wouldn't get sucked in
- We had to crush the subframe connecting bar to clear the downpipe
- We had to custom fab the lower IC pipe to fit my AGP intercooler
- We had to cut away some of the engine support to fit the LICP
- We had to whiz the downpipe clean as the previous owner had run over a trashbag or something and it melted to the exhaust
Hopefully get a change to dyno tune it on Monday or Tuesday.
Last edited by recompile; Nov 1, 2009 at 01:38 AM.
Trending Topics
#12
Evolved Member
iTrader: (6)
Join Date: Sep 2005
Location: NYC
Posts: 2,269
Likes: 0
Received 0 Likes
on
0 Posts
Good luck with the project? Why all these mods ti fit the kit?
I have the same kit and when I bought it i had a 3065. Then I only changed the turbo and the o2 housing very easily. Never had fitment issues. Everything allinged perfectly with both turbos.
The difference is that I already had a bushur licp with the Buschur race intercooler...
I have the same kit and when I bought it i had a 3065. Then I only changed the turbo and the o2 housing very easily. Never had fitment issues. Everything allinged perfectly with both turbos.
The difference is that I already had a bushur licp with the Buschur race intercooler...