EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

clearances...what's acceptable?

   
Old Oct 29, 2009 | 08:36 PM
Share
  #1  
whitemonster's Avatar
whitemonster
Thread Starter
Newbie
 
Joined: Apr 2009
Posts: 60
Likes: 0
From: bakersfield, ca
clearances...what's acceptable?
okay, when you check for clearance on the main and rod bearings what is an ideal number that will be good?
Reply
0
Old Oct 29, 2009 | 08:39 PM
Share
  #2  
JohnBradley's Avatar
JohnBradley
Evolved Member
Shutterbug
Liked
Loved
Community Favorite
iTrader: (30)
 
Joined: Jan 2004
Posts: 11,406
Likes: 78
From: Northwest
1.5-2 thou on rods, 2.5 thou on mains...as I recall.
Reply
0
Old Nov 1, 2009 | 06:28 AM
Share
  #3  
turbodoug's Avatar
turbodoug
Newbie
iTrader: (3)
 
Joined: Sep 2009
Posts: 17
Likes: 0
From: Middle TN
Service spec calls for 0.0008" to 0.0016" on the mains... but I always set them up at 0.0015" to 0.002" with great success.
Reply
0
Back to Subforum
Evo Engine / Turbo / Drivetrain
View Next Unread
NGK colder plugs, smoother idle???


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -7. The time now is 03:19 PM.