Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

2.5 Trans and Spec Twin Install ... not with out issues

Old Nov 10, 2009 | 07:11 AM
  #16  
WickedWhtMR's Avatar
Thread Starter
Evolving Member
iTrader: (13)
 
Joined: Apr 2006
Posts: 375
Likes: 0
From: South Florida
Originally Posted by rawkus
From my experience, the SRS light will clear itself if no problems exist. It sounds like you have a problem.

Dan
The light has been on for 2 days now.. I'll take it in to be looked at.
Reply
Old Nov 10, 2009 | 07:14 AM
  #17  
WickedWhtMR's Avatar
Thread Starter
Evolving Member
iTrader: (13)
 
Joined: Apr 2006
Posts: 375
Likes: 0
From: South Florida
Originally Posted by MR Turco
Oh, very odd. Most TOB whine is WHEN you press the pedal (or disengage the clutch).
Thats my thinking as well... I have adjust the clutch as close a possible with out dragging the clutch... I have also adjusted it all the way out... no change... If i just rest my foot on the peddle and take the play out of the peddle it goes away... i only have to move a small bit of hydraulic fluid for it to go way.
Reply
Old Nov 10, 2009 | 07:24 AM
  #18  
MR Turco's Avatar
EvoM Staff Alumni
iTrader: (16)
 
Joined: May 2007
Posts: 3,233
Likes: 3
From: Massachusetts
try adjusting it the other way.
Reply
Old Nov 10, 2009 | 07:37 AM
  #19  
WickedWhtMR's Avatar
Thread Starter
Evolving Member
iTrader: (13)
 
Joined: Apr 2006
Posts: 375
Likes: 0
From: South Florida
Originally Posted by MR Turco
try adjusting it the other way.
I did
Reply
Old Nov 10, 2009 | 08:11 AM
  #20  
WickedWhtMR's Avatar
Thread Starter
Evolving Member
iTrader: (13)
 
Joined: Apr 2006
Posts: 375
Likes: 0
From: South Florida
The Kacey at MAP seems to think that the bearing is riding the pressure plate... if I move the adjustment rod any further in the the clutch rides while the peddle is down and even then it still makes the noise.. he says it will probably go away in time.
Reply
Old Nov 10, 2009 | 08:44 AM
  #21  
4WS Tuning's Avatar
Former Sponsor
iTrader: (73)
 
Joined: Dec 2005
Posts: 4,668
Likes: 1
From: Ft. Lauderdale, Fl
Bump for Rob!

Install went very smooth, we need some help!.... There are lot of guys running this clutch, no one has heard these sounds before? Even if you dont have a solution post up to see how common this is.

Cheers!
Reply
Old Nov 10, 2009 | 10:36 AM
  #22  
linuxman51's Avatar
Evolving Member
iTrader: (7)
 
Joined: Jul 2007
Posts: 299
Likes: 0
From: montgomery, al
Originally Posted by 4WS Tuning
Bump for Rob!

Install went very smooth, we need some help!.... There are lot of guys running this clutch, no one has heard these sounds before? Even if you dont have a solution post up to see how common this is.

Cheers!
no whining on mine except in 1st gear.. which I know is the transmission (Ididit)
Reply
Old Nov 10, 2009 | 10:45 AM
  #23  
WickedWhtMR's Avatar
Thread Starter
Evolving Member
iTrader: (13)
 
Joined: Apr 2006
Posts: 375
Likes: 0
From: South Florida
Its not a gear whine.. I'm familiar with that.
Reply
Old Nov 10, 2009 | 10:52 AM
  #24  
Strictly Modified's Avatar
Former Sponsor
iTrader: (20)
 
Joined: Jun 2005
Posts: 909
Likes: 1
From: Schaumburg, IL
Post a recording of the noise, it will make diagnosing this noise alot easier.

-Cisco
Reply
Old Nov 10, 2009 | 11:58 AM
  #25  
WickedWhtMR's Avatar
Thread Starter
Evolving Member
iTrader: (13)
 
Joined: Apr 2006
Posts: 375
Likes: 0
From: South Florida
Originally Posted by Strictly Modified
Post a recording of the noise, it will make diagnosing this noise alot easier.

-Cisco
I'll work on this as soon as I get off of work.
Reply
Old Nov 10, 2009 | 05:20 PM
  #26  
WickedWhtMR's Avatar
Thread Starter
Evolving Member
iTrader: (13)
 
Joined: Apr 2006
Posts: 375
Likes: 0
From: South Florida
OK.. I have good audio of the noise... on the clutch and off the clutch.. I got it with the memo recorder in the iPhone. I sounds really clear. Its a .m4a file.. how do i get it on here?
Reply
Old Nov 10, 2009 | 05:53 PM
  #27  
WickedWhtMR's Avatar
Thread Starter
Evolving Member
iTrader: (13)
 
Joined: Apr 2006
Posts: 375
Likes: 0
From: South Florida
ok...here is a link to download the audio file
http://www.mediafire.com/file/3ynrdmvmk2i/11_10_09 6_30 PM EVO TRANS copy.m4a
Reply
Old Nov 10, 2009 | 05:57 PM
  #28  
WickedWhtMR's Avatar
Thread Starter
Evolving Member
iTrader: (13)
 
Joined: Apr 2006
Posts: 375
Likes: 0
From: South Florida
ok.. the audio was recorded using my iPhone. The file will for sure play in Itunes. I had a co-worker press the clutch in for me a few times so that you guys can here the difference between clutch in and clutch out. The higher pitched sound is with the clutch out... the grinding chattering is with the clutch in.
Reply
Old Nov 10, 2009 | 06:33 PM
  #29  
WickedWhtMR's Avatar
Thread Starter
Evolving Member
iTrader: (13)
 
Joined: Apr 2006
Posts: 375
Likes: 0
From: South Florida
bump for any help/ideas..
Reply
Old Nov 10, 2009 | 07:02 PM
  #30  
MR Turco's Avatar
EvoM Staff Alumni
iTrader: (16)
 
Joined: May 2007
Posts: 3,233
Likes: 3
From: Massachusetts
sounds like a bad TOB to me but i would follow up with Spec
Reply

Thread Tools
Search this Thread

All times are GMT -7. The time now is 01:53 PM.