EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Can't shift into any gear

Thread Tools
 
Search this Thread
 
Old Nov 23, 2009 | 10:56 AM
Share
  #1  
noob12's Avatar
noob12
Thread Starter
Newbie
iTrader: (2)
 
Joined: Nov 2008
Posts: 94
Likes: 0
From: Chicago
Can't shift into any gear
...
Last edited by noob12; Sep 15, 2010 at 08:44 PM.
Reply
0
Old Nov 23, 2009 | 12:04 PM
Share
  #2  
Kracka's Avatar
Kracka
Evolved Member
iTrader: (49)
 
Joined: Apr 2007
Posts: 8,970
Likes: 17
From: Prosper, TX
Sounds like either a hydraulic or clutch issue. First things first make sure your clutch pedal engagement is set properly and bleed your clutch hydraulic system. If that doesn't work, you probably damaged your clutch or maybe partially unclipped your TOB from the pressure plate. Which Exedy clutch do you have? Any vibrations coming through the pedal?
Reply
0
Old Nov 23, 2009 | 07:38 PM
Share
  #3  
noob12's Avatar
noob12
Thread Starter
Newbie
iTrader: (2)
 
Joined: Nov 2008
Posts: 94
Likes: 0
From: Chicago
The clutch pedal engagement is good. System not bleed yet though. Clutch is exedy twin plate p/n MM022HD. No vibration if I can remember but I will take a look again this weekend when I have time. I'm surprised that the clutch can go bad just from that one launch...ugh, I'm pissed.
Reply
0
Old Nov 23, 2009 | 07:50 PM
Share
  #4  
Kracka's Avatar
Kracka
Evolved Member
iTrader: (49)
 
Joined: Apr 2007
Posts: 8,970
Likes: 17
From: Prosper, TX
Make sure the TOB hasn't come unseated from the pressure plate clip.
Reply
0
Tags
Back to Subforum
Evo Engine / Turbo / Drivetrain
View Next Unread
TOB will not engage!




Advanced Search

All times are GMT -7. The time now is 02:18 PM.