Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Mileage when doing a turbo swap

Thread Tools
 
Search this Thread
 
Old Feb 26, 2010 | 12:02 PM
  #16  
gsrboi80's Avatar
Evolved Member
Photogenic
Photoriffic
Shutterbug
Liked
iTrader: (38)
 
Joined: Aug 2005
Posts: 7,909
Likes: 47
From: On a cliff
20g went on at 60k that came off and the PT 61mm ETS Kit went on at it at 100k

120 now so Good Times
Reply
Old Feb 26, 2010 | 12:08 PM
  #17  
VIIIrs's Avatar
Evolving Member
iTrader: (5)
 
Joined: Feb 2009
Posts: 156
Likes: 0
From: Georgia
Originally Posted by Silk
FP red at 70k now at 77k at 520 whp
WOW man that's awesome. I just put a red on last weekend i'm at 67k getting it tuned this weekend!
Reply
Old Feb 27, 2010 | 12:00 AM
  #18  
FL_SilverEvo8's Avatar
Thread Starter
Evolved Member
iTrader: (15)
 
Joined: Oct 2005
Posts: 1,139
Likes: 0
From: Fort Myers, FL
Originally Posted by bbyevo8u
i have 42k miles on my car and i'm about to swap my stock turbo out for a ported red and some other mods..

in your case you should be putting your money towards a built motor imo.... 2.4

the stock turbo is pretty damn reliable

how many miles you been running the meth kit for?
I think I have 40k miles with meth maybe a little more.

I see a few ppl on here with high mileage doing reds, black and two people doing a 850R and also a PT61. I am starting to feel a little bit better with doing a turbo swap to my car now.
Reply
Old Feb 27, 2010 | 12:02 AM
  #19  
FL_SilverEvo8's Avatar
Thread Starter
Evolved Member
iTrader: (15)
 
Joined: Oct 2005
Posts: 1,139
Likes: 0
From: Fort Myers, FL
Originally Posted by gsrboi80
20g went on at 60k that came off and the PT 61mm ETS Kit went on at it at 100k

120 now so Good Times
Did you do anything to the motor or are you on a stock block? I got to say wow nicely done.
Reply
Old Feb 27, 2010 | 06:26 AM
  #20  
gsrboi80's Avatar
Evolved Member
Photogenic
Photoriffic
Shutterbug
Liked
iTrader: (38)
 
Joined: Aug 2005
Posts: 7,909
Likes: 47
From: On a cliff
Originally Posted by FL_SilverEvo8
Did you do anything to the motor or are you on a stock block? I got to say wow nicely done.
Stock bottom end, trans, and TC.
Reply
Old Feb 27, 2010 | 11:12 AM
  #21  
FL_SilverEvo8's Avatar
Thread Starter
Evolved Member
iTrader: (15)
 
Joined: Oct 2005
Posts: 1,139
Likes: 0
From: Fort Myers, FL
Originally Posted by gsrboi80
Stock bottom end, trans, and TC.
Nice!

How much power are you putting down? (HP/TQ) I have notice that bigger turbos tend to be a little bit less aggressive in the TQ curve. Verse a stock hosing turbo. They spike so quick in the RPM band and so early. That is what I am worried about the most. Having so much stress that early on the motor. Isn't that what cause most motor failures?
Reply
Old Feb 27, 2010 | 03:15 PM
  #22  
gsrboi80's Avatar
Evolved Member
Photogenic
Photoriffic
Shutterbug
Liked
iTrader: (38)
 
Joined: Aug 2005
Posts: 7,909
Likes: 47
From: On a cliff
DLL shows consistantly 460-470 hp and between 360-370 tq 25-26 psi on pump gas. Def keeping the rods happy until the motors built LOL
Reply




All times are GMT -7. The time now is 01:42 AM.