Originally Posted by Timmay81

maf is gay

Originally Posted by JohnnyTSi

When I converted to Speed Density I made my own:

3.25-4" coupler, cut up a 4" diameter 45 degree aluminum elbow and clamped on a 9" long 4" inlet K&N filter.

Easy and inexpensive!

John-

Originally Posted by SBR INC

I have a possible solution that I'd let someone try for cheap, if interested. Let me know if someone wants to try it. = )

Marti

Originally Posted by JohnnyTSi

I've had a couple of people PM me about my home built intake pipe, so thought I'd share:

Parts List:
1 - 3.25" - 4" silicone Reducer/coupler
1 - Spectre 4" aluminum 45 elbow part# 9749
2 - 4" t-bolt clamps (could use worm-gear clamps)
1 - 3.25" worm gear clamp
1 - 4" K&N Filter, part# RE-0870

I cut 1" off of the turbo side of the 45* elbow to get the filter to clear everything, everything else should be self-explanitory.

Total cost was under $90.

Originally Posted by _des_

Exactly what I did. It sounds so insanely evil with such a big filter haha