FP Black owners, what intake are you running?
Evolving Member
iTrader: (23)
Joined: Sep 2010
Posts: 214
Likes: 0
From: town full of ricers.. East side WA
I've had a couple of people PM me about my home built intake pipe, so thought I'd share:
Parts List:
1 - 3.25" - 4" silicone Reducer/coupler
1 - Spectre 4" aluminum 45 elbow part# 9749
2 - 4" t-bolt clamps (could use worm-gear clamps)
1 - 3.25" worm gear clamp
1 - 4" K&N Filter, part# RE-0870
I cut 1" off of the turbo side of the 45* elbow to get the filter to clear everything, everything else should be self-explanitory.
Total cost was under $90.
Parts List:
1 - 3.25" - 4" silicone Reducer/coupler
1 - Spectre 4" aluminum 45 elbow part# 9749
2 - 4" t-bolt clamps (could use worm-gear clamps)
1 - 3.25" worm gear clamp
1 - 4" K&N Filter, part# RE-0870
I cut 1" off of the turbo side of the 45* elbow to get the filter to clear everything, everything else should be self-explanitory.
Total cost was under $90.
Thread
Thread Starter
Forum
Replies
Last Post
import111
Evo X Engine Management / Tuning Forums
3
Jul 8, 2011 01:43 PM
Mad_SB
09+ Ralliart Engine/Turbo/Drivetrain
7
Mar 10, 2011 04:12 AM
importjake00
Evo Engine / Turbo / Drivetrain
78
Sep 10, 2008 03:23 PM
