Car has 7400 miles on it and I broke it in VERY easy and changed to mineral after 250 miles, did a track event at 2500 and went to synthetic @ 3750. Car has a build date of April. I hope this will help some people get a base. This was done on a Dynapack.

 

Boost

 

TQ / AFR

 

All Pulls TQ / AFR

 

All 3 pulls boost chart

 

All 3 pulls power and Tq

 

This is a good one, The LOWER green line is a different stock evo on the dyno not to long ago. Look at the difference.

 

Nice pulls man Great numbers for stock

 

Thanks! Sorry about all the charts but I know if I was looking at it the more the better! I will post more with mods in the next month or 2.

 

Good numbers...
But the mineral oil thing is silly

 

11.5 air/fuel stock? hmmmmmm mine was was below 10 as i thought most evo's are.

 

Looks good, but for some reason your A/F ratios seem much leaner than any other stock EVO I have seen. Maybe there sensor is going out?
I believe we have seen similiar power from other stock EVO's on that type of dyno.

 

I am not sure about the A/F ratios.. Will check into that.

 

from what i understand , on a dyno pack it reads a bit higher then a dynojet . Not by much but there s a few difference .

 

Yes leaner than most. I also have a Dyanapack and we register usually 229-234 whp although one car did get 239 albeit running a bit richer than you. Congrats though. THat car is very strong.