Hi Guys,
im in a desperate of getting advise for setting my GSC S2 camshafts as my mech today were unable to get the timing setting as per GSC S2 spec's for my Evo 5 engine...
The reason is on the intake part the adj cam pully were completely on the maximum timing setting if set according to GSC spec's.
1) It might be the Cam Pully defect on the timing mark?
2) My mech dont know how to set the cams but which i STRONGLY DISBELIEVED!
What we get from the setting timing is :
a) Intake - Before ATDC 5* deg
b) Intake - Before ABDC 30* deg
c) Exh - BBDC 35* deg
d) Exh - BTDC 12* deg
Please help and i hope Greg from GSC will advise on this.
Attached are some pictures for reference.
(I hope i get it right as im not a technical guy)
A Million Thank you.
im in a desperate of getting advise for setting my GSC S2 camshafts as my mech today were unable to get the timing setting as per GSC S2 spec's for my Evo 5 engine...
The reason is on the intake part the adj cam pully were completely on the maximum timing setting if set according to GSC spec's.
1) It might be the Cam Pully defect on the timing mark?
2) My mech dont know how to set the cams but which i STRONGLY DISBELIEVED!
What we get from the setting timing is :
a) Intake - Before ATDC 5* deg
b) Intake - Before ABDC 30* deg
c) Exh - BBDC 35* deg
d) Exh - BTDC 12* deg
Please help and i hope Greg from GSC will advise on this.
Attached are some pictures for reference.
(I hope i get it right as im not a technical guy)
A Million Thank you.
