adamgetem

iTrader: (1)

Ok so after many hours of hard work i finally have my car fully back together after my rebuild. The problem is after reconnecting everything im left with one single connection that i can not find where it connects. I searched but failed, it was dark so im gonna try again tomorrow in the day light but for now i thought i would ask you guys for some input.



Im talking about the grey clip with the black and white wire coming from it.

german_evoVII

Knock sensor connector

I can see the knock sensor wire in the picture, its the black fabric covered cable between the dipstick tube and the grey connector. ( app 3inch deeper inside )

These both grey connectors ( attached ) will go onto the mounting bracket below the brown connector

javicracer

iTrader: (82)

yep thats the knock sensor.

adamgetem

iTrader: (1)

awesome thanks guys.