I am going to be installing my Garrett 35R soon, and I had a couple of quick questions.

1) Where will I be getting oil feed from (stock location, oil filter housing? - haven't looked yet, so if the stock location is the oil filter housing, sorry).

2) I plan on running a -4AN oil feed line, and -10AN oil drain line... However, I looked over a Garrett spec sheet, and I'm a little confused as to what fittings I will need for the CHRA. Can someone please shoot me a couple of links for this hardware?


Thanks!

 

I run the FP oil line and filter. It has the proper sized restrictor for the the 35R cartridges.

http://store.forcedperformance.net/m...e=Acc-OilLines

Pulled my oil from the stock location.

 

The oil inlet thread is 7/16 - 24 inverted flare. Feed it from the head.

 

Do you happen to have the drain dimensions as well? Thanks!

 

i know STM lists the fittings and stuff you need on their website.